69582042d7
Definitions for Sanguino SPI
Yuri Valentini
2013-01-04 18:32:08 +01:00
9e7b5056a0
{X,Y,Z}_{MIN,MAX}_POS are actually in Gcode coordinates.
Johann Rocholl
2012-12-28 16:20:10 -08:00
5f82f03ff3
Add italian MSG_RESUMING.
Daniele Sdei
2012-12-28 11:44:35 +01:00
5e3873c8db
Add german MSG_RESUMING.
daid303
2012-12-25 20:53:11 +01:00
01aac2a142
Small changes on the LCD panel, let the speed control work better, line up the parameter edit the same as the menu, remove some unused defines, and remove the Z from the 10mm move menu.
daid303
2012-12-21 16:14:47 +01:00
b69cb9fbd9
Change the end of SD cart print message from minutes/seconds to hours/minutes.
daid303
2012-12-19 12:26:40 +01:00
8caf5d252d
Remove bogus blank line.
Johann Rocholl
2012-12-16 12:50:20 -08:00
1c2ecddae4
Fix typo (# missing before define).
Johann Rocholl
2012-12-16 12:33:44 -08:00
6dfb8a2187
Fix home_all_axis to make QUICK_HOME work with Repetier-Host which sends G28 X0 Y0 Z0 instead of G28. Thanks to Matt Schoenholz for reporting this issue.
Johann Rocholl
2012-12-16 12:30:33 -08:00
3b2e5027e5
Merged updates from Marlin_v1.
Johann Rocholl
2012-12-16 12:19:24 -08:00
b39f5d614a
For boards with only one endstop per axis, automatically set *_MIN_PIN and *_MAX_PIN according to *_HOME_DIR.
Johann Rocholl
2012-12-16 12:08:55 -08:00
ab09fa4bbf
fixed pwm generation at pin D12 and D13 when one of them is used as FAN_PIN on Sanguino, added soft pwm entry for FAN_PIN in temperature.cpp
oni303
2012-12-16 01:36:57 +01:00
1a8f54cea1
The big LCD code update. This splits the display and menu implementation. Paving the way for future different displays. It also makes it easier to modify the menu structures while keeping everything consistant. Note that this most likely breaks the translations, which need to be updated.
daid303
2012-12-12 11:47:03 +01:00
6731c094ee
Fix compiling with just an 16x2 LCD and no buttons.
daid303
2012-12-12 11:32:33 +01:00
b99a928a80
Fix the M117 (display message on LCD) when used over USB with checksums.
daid303
2012-12-12 09:35:32 +01:00
55ba90ac19
Add PID functional range setting. With high powered heaters the current functional range of 10 degrees causes high overshoots as the PID needs to kick in before the temperature hits 10 degrees below target.
daid303
2012-12-12 09:08:37 +01:00
5ff5cee8ce
Fix the sensitive pin definitions, there where analogue numbers in the digital pin list. Also made M42 without a P function on the LED_PIN (which was otherwise a useless pin definition)
daid303
2012-12-11 14:53:53 +01:00
8b58edc70e
Merge branch 'Marlin_v1' of github.com:ErikZalm/Marlin into Marlin_v1
daid303
2012-12-11 13:38:34 +01:00
ca409e5531
Fix X/Y/Z_MIN_PIN for Printrboard.
Johann Rocholl
2012-12-11 01:59:48 -08:00
1f45cb0a51
Fix typo in MANUAL_HOME_POSITION (plural S missing) and improve comments.
Johann Rocholl
2012-12-11 01:54:40 -08:00
931a0052ea
Fix typo in MANUAL_HOME_POSITION (plural S missing) and reduce BLOCK_BUFFER_SIZE because 64 wasn't working for some reason.
Johann Rocholl
2012-12-11 01:22:04 -08:00
46ec4b648c
Added some missing Mxxx comments to M commands. Fixed the unsetting of the timer dividers for the fast PWM fan.
daid303
2012-12-11 10:21:44 +01:00
724f5aa36b
Update on makefile for moved Arduino addons.
Daid
2012-12-10 12:06:30 +01:00
6d9dfa96c3
Move the Arduino related stuff out of the Marlin tree, as they are not directly related to Marlin functionality but addons for the Arduino IDE. Also split up the addons for pre 1.0.0 Arduino and post 1.0.0 Arduino.
daid303
2012-12-10 12:02:29 +01:00
3fb07d9b8d
Add MINTEMP/MAXTEMP error to LCD, and fix temperature bug with more then 1 extruder.
daid303
2012-12-10 10:48:46 +01:00
8e2519e88b
Add realtime delta geometry in Marlin_main.cpp.
Johann Rocholl
2012-12-10 01:04:12 -08:00
cec7283b21
Enable QUICK_HOME for deltabot.
Johann Rocholl
2012-12-10 00:43:47 -08:00
2292441f0c
Use X/Y/Z_MAX_PIN instead of X/Y/Z_MIN_PIN for top endstops on deltabot.
Johann Rocholl
2012-12-10 00:43:14 -08:00
c430906d3b
Deltabot settings and configuration adjustments.
Johann Rocholl
2012-12-10 00:10:56 -08:00
82c8724b33
Fix compile with PID_DEBUG
daid303
2012-12-09 23:50:12 +01:00
9b160972a1
Merge branch 'Marlin_v1' of github.com:ErikZalm/Marlin into Marlin_v1
daid303
2012-12-09 23:46:42 +01:00
e036750bdf
Use the disable macros on initialization. Which fixes a bug when there is no pin defined for stepper enabled (motherboard 4)
daid303
2012-12-09 23:46:25 +01:00
fcd9de72ef
Merge branch 'Marlin_v1' of github.com:ErikZalm/Marlin into Marlin_v1
Daid
2012-12-09 23:31:07 +01:00
32d4373e0f
Add printrboard and brainwave to Makefile.
Daid
2012-12-09 23:30:55 +01:00
29435dfb4b
Proper avr for Sanguino in Makefile.
Daid
2012-12-09 23:02:03 +01:00
52158dffcc
Big temperature code update. No longer converts back and forwards between temperature and raw sample value. Reducing complexity, removing code. Also named some variables better. While keeping the safety intact and functionality the same.
daid303
2012-12-09 23:00:06 +01:00
ca7acbe6d9
Allow specification of which arduino hardware subvariant in Makefile.
Daid
2012-12-09 19:19:57 +01:00
33247733e0
Teensylu and Printrboard use different analog pins for thermistors.
Johann Rocholl
2012-12-09 02:19:13 -08:00
621c24a10f
AT90USB is only defined after pins.h is included.
Johann Rocholl
2012-12-09 01:40:33 -08:00
6cba11f087
Stop redefining MOTHERBOARD and #define AT90USB instead. Also put #ifndef AT90USB around the HardwareSerial_h trick, so now Printrboard / Brainwave support compiles on Arduino 1.0.2 as well.
Johann Rocholl
2012-12-09 01:32:09 -08:00
4d351b4846
Improved formatting and comments for consistency.
Johann Rocholl
2012-12-08 20:15:53 -08:00
a30007caa4
If fastio.h is not messed up then Teensylu and Printrboard are actually using the same pins.
Johann Rocholl
2012-12-08 19:46:42 -08:00
6aa87a7b67
Use the same fastio.h definition for AT90USB1286/7 and AT90USB646/7.
Johann Rocholl
2012-12-08 15:16:38 -08:00
b1c38d4c82
Avoid compiler warnings (redefined MOTHERBOARD) in Arduino 1.0 and greater.
Johann Rocholl
2012-12-08 11:34:18 -08:00
ce4b5bbeaa
Add AT90USB646 support from Sprinter to fastio.h.
Johann Rocholl
2012-12-08 10:45:58 -08:00
f413aa33b3
Small makefile change, posibility to add defines on the commandline, and fix compiling with watchdog enabled when using the Makefile.
Daid
2012-12-08 11:49:53 +01:00
587154c01b
Fix the WATCHPERIOD implementation. It did not work correctly in a multi extruder setup, it did not work after 32 seconds after startup (int16 used as millies timestamp). And it did not work if you gave an M104 or M109 when the target was already around the target setpoint. So on average, it did not work at all. The new implementation should be robust in detecting a failure to heat up.
daid303
2012-12-06 10:36:07 +01:00
1f27870d41
Fix compiling the watchdog error message when the manual reset watchdog is used.
daid303
2012-12-06 10:27:50 +01:00
c5d4225804
Mistake there, not sure why I did that. My bad.
daid303
2012-12-05 20:23:13 +01:00
529748894c
Minor changes in the temperature code for some cleanup.
daid303
2012-12-05 19:54:01 +01:00
4e26ecc940
The Partial release message (which does not really tell you anything) overwrites the final print time on the LCD, which is a real shame. So I removed the message.
daid303
2012-12-05 19:32:26 +01:00
c421774422
The Partial release message (which does not really tell you anything) overwrites the final print time on the LCD, which is a real shame. So I removed the message.
daid303
2012-12-05 19:32:02 +01:00
6a9bee27cc
Changed the naming of some LCD functions, so the names match better what the function does. Also moved around some prototypes for general cleanup.
daid303
2012-12-03 12:52:00 +01:00
94ea26ff46
Some minor changes on code style. And a bugfix where the counters for positioning in the stepper where wrong depending on compiler settings. (Caused strange values to reported back with M114 and endstop triggers). Also fixed compiling with FWRETRACT enabled.
daid303
2012-12-03 12:13:20 +01:00
6c51fe5039
Fix the bug where the SD percentage calculation is wrong when the file is larger then 42MB
daid303
2012-12-03 11:35:36 +01:00
99e9554edd
Some fixes in the Makefile to support Arduino 1.0.0 or higher and added the Rambo. Still needs some more work for the different arduino hardware variants.
Daid
2012-11-24 11:46:31 +01:00
dbbf050005
More rambo fixes
Erik vd Zalm
2012-11-21 20:53:56 +01:00
f934d0ef5b
Merge remote-tracking branch 'tonokip/Marlin_v1' into Marlin_v1
Erik vd Zalm
2012-11-21 20:36:30 +01:00
e48dfcc2b3
Tmp copy before merge
Erik vd Zalm
2012-11-21 20:29:31 +01:00
b98fb17fe9
Small FREQUENCY_LIMIT changes
Erik vd Zalm
2012-11-21 20:17:44 +01:00
Nicolas Rossi
Yuri Valentini
Erik vd Zalm
daid
Johann Rocholl
Daniele Sdei
oni303
Sergey Taranenko
Kevin O'Connor
brupje
Gege