From e87ae5b643db6829ff71ce638d3c88b0527538e1 Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Sun, 8 Apr 2018 23:53:29 -0500 Subject: [PATCH] Add Z_PROBE_LOW_POINT to example configs --- .../AlephObjects/TAZ4/Configuration.h | 2 ++ .../AliExpress/CL-260/Configuration.h | 2 ++ .../Anet/A6/Configuration.h | 17 +++++++++++------ .../Anet/A8/Configuration.h | 2 ++ .../BIBO/TouchX/Cyclops/Configuration.h | 2 ++ .../BIBO/TouchX/default/Configuration.h | 2 ++ .../BQ/Hephestos/Configuration.h | 2 ++ .../BQ/Hephestos_2/Configuration.h | 2 ++ .../BQ/WITBOX/Configuration.h | 2 ++ .../Cartesio/Configuration.h | 2 ++ .../Creality/CR-10/Configuration.h | 2 ++ .../Creality/CR-10S/Configuration.h | 2 ++ .../Creality/CR-10mini/Configuration.h | 2 ++ .../Creality/CR-8/Configuration.h | 2 ++ .../Creality/Ender-2/Configuration.h | 2 ++ .../Creality/Ender-4/Configuration.h | 2 ++ .../Felix/Configuration.h | 2 ++ .../Felix/DUAL/Configuration.h | 2 ++ .../FolgerTech/i3-2020/Configuration.h | 2 ++ .../FolgerTech/i3-2020/Configuration_adv.h | 3 ++- .../Geeetech/GT2560/Configuration.h | 2 ++ .../Geeetech/I3_Pro_X-GT2560/Configuration.h | 2 ++ .../Prusa i3 Pro B/bltouch/Configuration.h | 2 ++ .../Prusa i3 Pro B/noprobe/Configuration.h | 2 ++ .../Infitary/i3-M508/Configuration.h | 2 ++ .../JGAurora/A5/Configuration.h | 2 ++ .../Malyan/M150/Configuration.h | 2 ++ .../Micromake/C1/basic/Configuration.h | 2 ++ .../Micromake/C1/enhanced/Configuration.h | 2 ++ .../RepRapPro/Huxley/Configuration.h | 2 ++ .../RepRapWorld/Megatronics/Configuration.h | 2 ++ .../RigidBot/Configuration.h | 2 ++ .../SCARA/Configuration.h | 2 ++ .../Sanguinololu/Configuration.h | 2 ++ .../TinyBoy2/Configuration.h | 2 ++ .../Tronxy/X1/Configuration.h | 2 ++ .../Tronxy/X5S/Configuration.h | 2 ++ .../Tronxy/XY100/Configuration.h | 2 ++ .../Velleman/K8200/Configuration.h | 2 ++ .../Velleman/K8400/Configuration.h | 2 ++ .../Velleman/K8400/Dual-head/Configuration.h | 2 ++ .../Wanhao/Duplicator 6/Configuration.h | 2 ++ .../adafruit/ST7565/Configuration.h | 2 ++ .../delta/FLSUN/auto_calibrate/Configuration.h | 2 ++ .../delta/FLSUN/kossel/Configuration.h | 2 ++ .../delta/FLSUN/kossel_mini/Configuration.h | 2 ++ .../delta/Hatchbox_Alpha/Configuration.h | 2 ++ .../delta/generic/Configuration.h | 2 ++ .../delta/kossel_mini/Configuration.h | 2 ++ .../delta/kossel_pro/Configuration.h | 3 ++- .../delta/kossel_xl/Configuration.h | 2 ++ .../gCreate/gMax1.5+/Configuration.h | 2 ++ .../makibox/Configuration.h | 2 ++ .../tvrrug/Round2/Configuration.h | 2 ++ .../wt150/Configuration.h | 2 ++ 55 files changed, 119 insertions(+), 8 deletions(-) diff --git a/Marlin/example_configurations/AlephObjects/TAZ4/Configuration.h b/Marlin/example_configurations/AlephObjects/TAZ4/Configuration.h index 497359466..5221f867f 100644 --- a/Marlin/example_configurations/AlephObjects/TAZ4/Configuration.h +++ b/Marlin/example_configurations/AlephObjects/TAZ4/Configuration.h @@ -764,6 +764,8 @@ #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points //#define Z_AFTER_PROBING 5 // Z position after probing is done +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 #define Z_PROBE_OFFSET_RANGE_MAX 20 diff --git a/Marlin/example_configurations/AliExpress/CL-260/Configuration.h b/Marlin/example_configurations/AliExpress/CL-260/Configuration.h index 7304f4ed1..4a84f565d 100644 --- a/Marlin/example_configurations/AliExpress/CL-260/Configuration.h +++ b/Marlin/example_configurations/AliExpress/CL-260/Configuration.h @@ -744,6 +744,8 @@ #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points //#define Z_AFTER_PROBING 5 // Z position after probing is done +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 #define Z_PROBE_OFFSET_RANGE_MAX 20 diff --git a/Marlin/example_configurations/Anet/A6/Configuration.h b/Marlin/example_configurations/Anet/A6/Configuration.h index bd889987d..191276db8 100644 --- a/Marlin/example_configurations/Anet/A6/Configuration.h +++ b/Marlin/example_configurations/Anet/A6/Configuration.h @@ -810,12 +810,17 @@ * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. */ -#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points -//#define Z_AFTER_PROBING 5 // Z position after probing is done -//#define Z_CLEARANCE_DEPLOY_PROBE 5 // Z Clearance for Deploy/Stow -//#define Z_CLEARANCE_BETWEEN_PROBES 3 // Z Clearance between probe points -//#define Z_AFTER_PROBING 3 // Z position after probing is done +#if 1 // 0 for less clearance + #define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow + #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points + //#define Z_AFTER_PROBING 5 // Z position after probing is done +#else + #define Z_CLEARANCE_DEPLOY_PROBE 5 // Z Clearance for Deploy/Stow + #define Z_CLEARANCE_BETWEEN_PROBES 3 // Z Clearance between probe points + //#define Z_AFTER_PROBING 3 // Z position after probing is done +#endif + +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 diff --git a/Marlin/example_configurations/Anet/A8/Configuration.h b/Marlin/example_configurations/Anet/A8/Configuration.h index 22fdb8591..1a4867f04 100644 --- a/Marlin/example_configurations/Anet/A8/Configuration.h +++ b/Marlin/example_configurations/Anet/A8/Configuration.h @@ -751,6 +751,8 @@ #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points //#define Z_AFTER_PROBING 5 // Z position after probing is done +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 #define Z_PROBE_OFFSET_RANGE_MAX 20 diff --git a/Marlin/example_configurations/BIBO/TouchX/Cyclops/Configuration.h b/Marlin/example_configurations/BIBO/TouchX/Cyclops/Configuration.h index 83a07d6d9..0d50d8de3 100644 --- a/Marlin/example_configurations/BIBO/TouchX/Cyclops/Configuration.h +++ b/Marlin/example_configurations/BIBO/TouchX/Cyclops/Configuration.h @@ -744,6 +744,8 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points //#define Z_AFTER_PROBING 10 // Z position after probing is done +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 #define Z_PROBE_OFFSET_RANGE_MAX 20 diff --git a/Marlin/example_configurations/BIBO/TouchX/default/Configuration.h b/Marlin/example_configurations/BIBO/TouchX/default/Configuration.h index 4ea3180d5..9d77ddc99 100644 --- a/Marlin/example_configurations/BIBO/TouchX/default/Configuration.h +++ b/Marlin/example_configurations/BIBO/TouchX/default/Configuration.h @@ -744,6 +744,8 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo #define Z_CLEARANCE_BETWEEN_PROBES 10 // Z Clearance between probe points //#define Z_AFTER_PROBING 10 // Z position after probing is done +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 #define Z_PROBE_OFFSET_RANGE_MAX 20 diff --git a/Marlin/example_configurations/BQ/Hephestos/Configuration.h b/Marlin/example_configurations/BQ/Hephestos/Configuration.h index 21a53116f..530da0c0d 100644 --- a/Marlin/example_configurations/BQ/Hephestos/Configuration.h +++ b/Marlin/example_configurations/BQ/Hephestos/Configuration.h @@ -732,6 +732,8 @@ #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points //#define Z_AFTER_PROBING 5 // Z position after probing is done +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 #define Z_PROBE_OFFSET_RANGE_MAX 20 diff --git a/Marlin/example_configurations/BQ/Hephestos_2/Configuration.h b/Marlin/example_configurations/BQ/Hephestos_2/Configuration.h index 6b3ac0a6c..d4f4a24ef 100644 --- a/Marlin/example_configurations/BQ/Hephestos_2/Configuration.h +++ b/Marlin/example_configurations/BQ/Hephestos_2/Configuration.h @@ -745,6 +745,8 @@ #define Z_CLEARANCE_BETWEEN_PROBES 2 // Z Clearance between probe points //#define Z_AFTER_PROBING 2 // Z position after probing is done +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -5.5 #define Z_PROBE_OFFSET_RANGE_MAX -3 diff --git a/Marlin/example_configurations/BQ/WITBOX/Configuration.h b/Marlin/example_configurations/BQ/WITBOX/Configuration.h index fc9a5eefd..9a5dd4a11 100644 --- a/Marlin/example_configurations/BQ/WITBOX/Configuration.h +++ b/Marlin/example_configurations/BQ/WITBOX/Configuration.h @@ -732,6 +732,8 @@ #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points //#define Z_AFTER_PROBING 5 // Z position after probing is done +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 #define Z_PROBE_OFFSET_RANGE_MAX 20 diff --git a/Marlin/example_configurations/Cartesio/Configuration.h b/Marlin/example_configurations/Cartesio/Configuration.h index 54c9a56b9..7ef89a5d5 100644 --- a/Marlin/example_configurations/Cartesio/Configuration.h +++ b/Marlin/example_configurations/Cartesio/Configuration.h @@ -743,6 +743,8 @@ #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points //#define Z_AFTER_PROBING 5 // Z position after probing is done +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 #define Z_PROBE_OFFSET_RANGE_MAX 20 diff --git a/Marlin/example_configurations/Creality/CR-10/Configuration.h b/Marlin/example_configurations/Creality/CR-10/Configuration.h index d5216d0e5..da1afeb23 100755 --- a/Marlin/example_configurations/Creality/CR-10/Configuration.h +++ b/Marlin/example_configurations/Creality/CR-10/Configuration.h @@ -754,6 +754,8 @@ #define Z_CLEARANCE_BETWEEN_PROBES 10 // Z Clearance between probe points //#define Z_AFTER_PROBING 10 // Z position after probing is done +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 #define Z_PROBE_OFFSET_RANGE_MAX 20 diff --git a/Marlin/example_configurations/Creality/CR-10S/Configuration.h b/Marlin/example_configurations/Creality/CR-10S/Configuration.h index 9a4592219..50ed8c026 100644 --- a/Marlin/example_configurations/Creality/CR-10S/Configuration.h +++ b/Marlin/example_configurations/Creality/CR-10S/Configuration.h @@ -744,6 +744,8 @@ #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points //#define Z_AFTER_PROBING 5 // Z position after probing is done +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 #define Z_PROBE_OFFSET_RANGE_MAX 20 diff --git a/Marlin/example_configurations/Creality/CR-10mini/Configuration.h b/Marlin/example_configurations/Creality/CR-10mini/Configuration.h index 223b5a0a0..c27ddefdf 100644 --- a/Marlin/example_configurations/Creality/CR-10mini/Configuration.h +++ b/Marlin/example_configurations/Creality/CR-10mini/Configuration.h @@ -763,6 +763,8 @@ #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points //#define Z_AFTER_PROBING 5 // Z position after probing is done +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 #define Z_PROBE_OFFSET_RANGE_MAX 20 diff --git a/Marlin/example_configurations/Creality/CR-8/Configuration.h b/Marlin/example_configurations/Creality/CR-8/Configuration.h index 78cf46380..86fd9ccf9 100644 --- a/Marlin/example_configurations/Creality/CR-8/Configuration.h +++ b/Marlin/example_configurations/Creality/CR-8/Configuration.h @@ -753,6 +753,8 @@ #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points //#define Z_AFTER_PROBING 5 // Z position after probing is done +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 #define Z_PROBE_OFFSET_RANGE_MAX 20 diff --git a/Marlin/example_configurations/Creality/Ender-2/Configuration.h b/Marlin/example_configurations/Creality/Ender-2/Configuration.h index 1d76aee3c..23b0835df 100644 --- a/Marlin/example_configurations/Creality/Ender-2/Configuration.h +++ b/Marlin/example_configurations/Creality/Ender-2/Configuration.h @@ -748,6 +748,8 @@ #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points //#define Z_AFTER_PROBING 5 // Z position after probing is done +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 #define Z_PROBE_OFFSET_RANGE_MAX 20 diff --git a/Marlin/example_configurations/Creality/Ender-4/Configuration.h b/Marlin/example_configurations/Creality/Ender-4/Configuration.h index 88db0f018..8c2426ced 100644 --- a/Marlin/example_configurations/Creality/Ender-4/Configuration.h +++ b/Marlin/example_configurations/Creality/Ender-4/Configuration.h @@ -754,6 +754,8 @@ #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points //#define Z_AFTER_PROBING 5 // Z position after probing is done +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 #define Z_PROBE_OFFSET_RANGE_MAX 20 diff --git a/Marlin/example_configurations/Felix/Configuration.h b/Marlin/example_configurations/Felix/Configuration.h index 8973b98fb..ec3748a0a 100644 --- a/Marlin/example_configurations/Felix/Configuration.h +++ b/Marlin/example_configurations/Felix/Configuration.h @@ -726,6 +726,8 @@ #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points //#define Z_AFTER_PROBING 5 // Z position after probing is done +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 #define Z_PROBE_OFFSET_RANGE_MAX 20 diff --git a/Marlin/example_configurations/Felix/DUAL/Configuration.h b/Marlin/example_configurations/Felix/DUAL/Configuration.h index cefe9d79e..f2ac3e960 100644 --- a/Marlin/example_configurations/Felix/DUAL/Configuration.h +++ b/Marlin/example_configurations/Felix/DUAL/Configuration.h @@ -726,6 +726,8 @@ #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points //#define Z_AFTER_PROBING 5 // Z position after probing is done +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 #define Z_PROBE_OFFSET_RANGE_MAX 20 diff --git a/Marlin/example_configurations/FolgerTech/i3-2020/Configuration.h b/Marlin/example_configurations/FolgerTech/i3-2020/Configuration.h index b1c988d41..15bcd60db 100644 --- a/Marlin/example_configurations/FolgerTech/i3-2020/Configuration.h +++ b/Marlin/example_configurations/FolgerTech/i3-2020/Configuration.h @@ -750,6 +750,8 @@ #define Z_CLEARANCE_BETWEEN_PROBES 3 // Z Clearance between probe points //#define Z_AFTER_PROBING 3 // Z position after probing is done +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 #define Z_PROBE_OFFSET_RANGE_MAX 20 diff --git a/Marlin/example_configurations/FolgerTech/i3-2020/Configuration_adv.h b/Marlin/example_configurations/FolgerTech/i3-2020/Configuration_adv.h index 41f96cc0b..40f495e6a 100644 --- a/Marlin/example_configurations/FolgerTech/i3-2020/Configuration_adv.h +++ b/Marlin/example_configurations/FolgerTech/i3-2020/Configuration_adv.h @@ -473,7 +473,8 @@ //#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster #define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 -// Actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS +// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. +// These correspond to the physical drivers, so be mindful if the order is changed. #define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO //=========================================================================== diff --git a/Marlin/example_configurations/Geeetech/GT2560/Configuration.h b/Marlin/example_configurations/Geeetech/GT2560/Configuration.h index 4c88ba090..6329fb759 100644 --- a/Marlin/example_configurations/Geeetech/GT2560/Configuration.h +++ b/Marlin/example_configurations/Geeetech/GT2560/Configuration.h @@ -759,6 +759,8 @@ #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points //#define Z_AFTER_PROBING 5 // Z position after probing is done +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 #define Z_PROBE_OFFSET_RANGE_MAX 20 diff --git a/Marlin/example_configurations/Geeetech/I3_Pro_X-GT2560/Configuration.h b/Marlin/example_configurations/Geeetech/I3_Pro_X-GT2560/Configuration.h index 2e7d07a8c..9f97e03ae 100644 --- a/Marlin/example_configurations/Geeetech/I3_Pro_X-GT2560/Configuration.h +++ b/Marlin/example_configurations/Geeetech/I3_Pro_X-GT2560/Configuration.h @@ -744,6 +744,8 @@ #define Z_CLEARANCE_BETWEEN_PROBES 6 // Z Clearance between probe points //#define Z_AFTER_PROBING 6 // Z position after probing is done +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 #define Z_PROBE_OFFSET_RANGE_MAX 20 diff --git a/Marlin/example_configurations/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h b/Marlin/example_configurations/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h index a5e7f7152..8dd11fbe0 100644 --- a/Marlin/example_configurations/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h +++ b/Marlin/example_configurations/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h @@ -760,6 +760,8 @@ #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points //#define Z_AFTER_PROBING 5 // Z position after probing is done +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 #define Z_PROBE_OFFSET_RANGE_MAX 20 diff --git a/Marlin/example_configurations/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h b/Marlin/example_configurations/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h index b356213a8..00cc7a843 100644 --- a/Marlin/example_configurations/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h +++ b/Marlin/example_configurations/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h @@ -759,6 +759,8 @@ #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points //#define Z_AFTER_PROBING 5 // Z position after probing is done +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 #define Z_PROBE_OFFSET_RANGE_MAX 20 diff --git a/Marlin/example_configurations/Infitary/i3-M508/Configuration.h b/Marlin/example_configurations/Infitary/i3-M508/Configuration.h index 1d2d5812b..eef6280d9 100644 --- a/Marlin/example_configurations/Infitary/i3-M508/Configuration.h +++ b/Marlin/example_configurations/Infitary/i3-M508/Configuration.h @@ -748,6 +748,8 @@ #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points //#define Z_AFTER_PROBING 5 // Z position after probing is done +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 #define Z_PROBE_OFFSET_RANGE_MAX 20 diff --git a/Marlin/example_configurations/JGAurora/A5/Configuration.h b/Marlin/example_configurations/JGAurora/A5/Configuration.h index e73c70270..2dbb0f48f 100644 --- a/Marlin/example_configurations/JGAurora/A5/Configuration.h +++ b/Marlin/example_configurations/JGAurora/A5/Configuration.h @@ -756,6 +756,8 @@ #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points //#define Z_AFTER_PROBING 5 // Z position after probing is done +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 #define Z_PROBE_OFFSET_RANGE_MAX 20 diff --git a/Marlin/example_configurations/Malyan/M150/Configuration.h b/Marlin/example_configurations/Malyan/M150/Configuration.h index 510374f57..a483363f6 100644 --- a/Marlin/example_configurations/Malyan/M150/Configuration.h +++ b/Marlin/example_configurations/Malyan/M150/Configuration.h @@ -768,6 +768,8 @@ //#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points //#define Z_AFTER_PROBING 5 // Z position after probing is done +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + // For M851 give a range for adjusting the Z probe offset //#define Z_PROBE_OFFSET_RANGE_MIN -20 //#define Z_PROBE_OFFSET_RANGE_MAX 20 diff --git a/Marlin/example_configurations/Micromake/C1/basic/Configuration.h b/Marlin/example_configurations/Micromake/C1/basic/Configuration.h index ea6d5c1d8..60ec3b5db 100644 --- a/Marlin/example_configurations/Micromake/C1/basic/Configuration.h +++ b/Marlin/example_configurations/Micromake/C1/basic/Configuration.h @@ -748,6 +748,8 @@ #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points //#define Z_AFTER_PROBING 5 // Z position after probing is done +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 #define Z_PROBE_OFFSET_RANGE_MAX 20 diff --git a/Marlin/example_configurations/Micromake/C1/enhanced/Configuration.h b/Marlin/example_configurations/Micromake/C1/enhanced/Configuration.h index 0a7c29f95..2ad958dcc 100644 --- a/Marlin/example_configurations/Micromake/C1/enhanced/Configuration.h +++ b/Marlin/example_configurations/Micromake/C1/enhanced/Configuration.h @@ -748,6 +748,8 @@ #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points //#define Z_AFTER_PROBING 5 // Z position after probing is done +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 #define Z_PROBE_OFFSET_RANGE_MAX 20 diff --git a/Marlin/example_configurations/RepRapPro/Huxley/Configuration.h b/Marlin/example_configurations/RepRapPro/Huxley/Configuration.h index 2363b9539..c6eb7cc2f 100644 --- a/Marlin/example_configurations/RepRapPro/Huxley/Configuration.h +++ b/Marlin/example_configurations/RepRapPro/Huxley/Configuration.h @@ -784,6 +784,8 @@ Black rubber belt(MXL), 18 - tooth aluminium pulley : 87.489 step per mm (Huxley #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points //#define Z_AFTER_PROBING 5 // Z position after probing is done +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 #define Z_PROBE_OFFSET_RANGE_MAX 20 diff --git a/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h b/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h index 9f1d11e58..5aef42a5b 100644 --- a/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h +++ b/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h @@ -744,6 +744,8 @@ #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points //#define Z_AFTER_PROBING 5 // Z position after probing is done +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 #define Z_PROBE_OFFSET_RANGE_MAX 20 diff --git a/Marlin/example_configurations/RigidBot/Configuration.h b/Marlin/example_configurations/RigidBot/Configuration.h index f72199ea5..1f670ffff 100644 --- a/Marlin/example_configurations/RigidBot/Configuration.h +++ b/Marlin/example_configurations/RigidBot/Configuration.h @@ -742,6 +742,8 @@ #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points //#define Z_AFTER_PROBING 5 // Z position after probing is done +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 #define Z_PROBE_OFFSET_RANGE_MAX 20 diff --git a/Marlin/example_configurations/SCARA/Configuration.h b/Marlin/example_configurations/SCARA/Configuration.h index e3ddf4974..b532c60a2 100644 --- a/Marlin/example_configurations/SCARA/Configuration.h +++ b/Marlin/example_configurations/SCARA/Configuration.h @@ -756,6 +756,8 @@ #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points //#define Z_AFTER_PROBING 5 // Z position after probing is done +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 #define Z_PROBE_OFFSET_RANGE_MAX 20 diff --git a/Marlin/example_configurations/Sanguinololu/Configuration.h b/Marlin/example_configurations/Sanguinololu/Configuration.h index 5f61e49f4..cc209465d 100644 --- a/Marlin/example_configurations/Sanguinololu/Configuration.h +++ b/Marlin/example_configurations/Sanguinololu/Configuration.h @@ -775,6 +775,8 @@ #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points //#define Z_AFTER_PROBING 5 // Z position after probing is done +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 #define Z_PROBE_OFFSET_RANGE_MAX 20 diff --git a/Marlin/example_configurations/TinyBoy2/Configuration.h b/Marlin/example_configurations/TinyBoy2/Configuration.h index 911f0fbf2..45a9c69ef 100644 --- a/Marlin/example_configurations/TinyBoy2/Configuration.h +++ b/Marlin/example_configurations/TinyBoy2/Configuration.h @@ -795,6 +795,8 @@ #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points //#define Z_AFTER_PROBING 5 // Z position after probing is done +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 #define Z_PROBE_OFFSET_RANGE_MAX 20 diff --git a/Marlin/example_configurations/Tronxy/X1/Configuration.h b/Marlin/example_configurations/Tronxy/X1/Configuration.h index bb6452d01..1540ea932 100644 --- a/Marlin/example_configurations/Tronxy/X1/Configuration.h +++ b/Marlin/example_configurations/Tronxy/X1/Configuration.h @@ -744,6 +744,8 @@ #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points //#define Z_AFTER_PROBING 5 // Z position after probing is done +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 #define Z_PROBE_OFFSET_RANGE_MAX 20 diff --git a/Marlin/example_configurations/Tronxy/X5S/Configuration.h b/Marlin/example_configurations/Tronxy/X5S/Configuration.h index c71831923..f43f4fb1a 100644 --- a/Marlin/example_configurations/Tronxy/X5S/Configuration.h +++ b/Marlin/example_configurations/Tronxy/X5S/Configuration.h @@ -744,6 +744,8 @@ #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points //#define Z_AFTER_PROBING 5 // Z position after probing is done +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 #define Z_PROBE_OFFSET_RANGE_MAX 20 diff --git a/Marlin/example_configurations/Tronxy/XY100/Configuration.h b/Marlin/example_configurations/Tronxy/XY100/Configuration.h index 22096993c..6f8c1a05a 100644 --- a/Marlin/example_configurations/Tronxy/XY100/Configuration.h +++ b/Marlin/example_configurations/Tronxy/XY100/Configuration.h @@ -755,6 +755,8 @@ #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points //#define Z_AFTER_PROBING 5 // Z position after probing is done +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 #define Z_PROBE_OFFSET_RANGE_MAX 20 diff --git a/Marlin/example_configurations/Velleman/K8200/Configuration.h b/Marlin/example_configurations/Velleman/K8200/Configuration.h index a7bbbf53d..64af06ce1 100644 --- a/Marlin/example_configurations/Velleman/K8200/Configuration.h +++ b/Marlin/example_configurations/Velleman/K8200/Configuration.h @@ -773,6 +773,8 @@ #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points //#define Z_AFTER_PROBING 5 // Z position after probing is done +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 #define Z_PROBE_OFFSET_RANGE_MAX 20 diff --git a/Marlin/example_configurations/Velleman/K8400/Configuration.h b/Marlin/example_configurations/Velleman/K8400/Configuration.h index 7342b455d..18e5c9cbb 100644 --- a/Marlin/example_configurations/Velleman/K8400/Configuration.h +++ b/Marlin/example_configurations/Velleman/K8400/Configuration.h @@ -744,6 +744,8 @@ #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points //#define Z_AFTER_PROBING 5 // Z position after probing is done +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 #define Z_PROBE_OFFSET_RANGE_MAX 20 diff --git a/Marlin/example_configurations/Velleman/K8400/Dual-head/Configuration.h b/Marlin/example_configurations/Velleman/K8400/Dual-head/Configuration.h index 5f1e6cca5..7ce0e737b 100644 --- a/Marlin/example_configurations/Velleman/K8400/Dual-head/Configuration.h +++ b/Marlin/example_configurations/Velleman/K8400/Dual-head/Configuration.h @@ -744,6 +744,8 @@ #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points //#define Z_AFTER_PROBING 5 // Z position after probing is done +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 #define Z_PROBE_OFFSET_RANGE_MAX 20 diff --git a/Marlin/example_configurations/Wanhao/Duplicator 6/Configuration.h b/Marlin/example_configurations/Wanhao/Duplicator 6/Configuration.h index 9839b84bf..71a8fe9b9 100644 --- a/Marlin/example_configurations/Wanhao/Duplicator 6/Configuration.h +++ b/Marlin/example_configurations/Wanhao/Duplicator 6/Configuration.h @@ -754,6 +754,8 @@ #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points //#define Z_AFTER_PROBING 5 // Z position after probing is done +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 #define Z_PROBE_OFFSET_RANGE_MAX 20 diff --git a/Marlin/example_configurations/adafruit/ST7565/Configuration.h b/Marlin/example_configurations/adafruit/ST7565/Configuration.h index 7492a9621..2afc20ec4 100644 --- a/Marlin/example_configurations/adafruit/ST7565/Configuration.h +++ b/Marlin/example_configurations/adafruit/ST7565/Configuration.h @@ -744,6 +744,8 @@ #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points //#define Z_AFTER_PROBING 5 // Z position after probing is done +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 #define Z_PROBE_OFFSET_RANGE_MAX 20 diff --git a/Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration.h b/Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration.h index 63fdfc0e1..fbac0946c 100644 --- a/Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration.h +++ b/Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration.h @@ -874,6 +874,8 @@ #define Z_CLEARANCE_BETWEEN_PROBES 2 // Z Clearance between probe points //#define Z_AFTER_PROBING 2 // Z position after probing is done +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 #define Z_PROBE_OFFSET_RANGE_MAX 20 diff --git a/Marlin/example_configurations/delta/FLSUN/kossel/Configuration.h b/Marlin/example_configurations/delta/FLSUN/kossel/Configuration.h index 07d15cb3f..48be0f6c1 100644 --- a/Marlin/example_configurations/delta/FLSUN/kossel/Configuration.h +++ b/Marlin/example_configurations/delta/FLSUN/kossel/Configuration.h @@ -874,6 +874,8 @@ #define Z_CLEARANCE_BETWEEN_PROBES 2 // Z Clearance between probe points //#define Z_AFTER_PROBING 2 // Z position after probing is done +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 #define Z_PROBE_OFFSET_RANGE_MAX 20 diff --git a/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration.h b/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration.h index 1423d3df8..34286f986 100644 --- a/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration.h +++ b/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration.h @@ -874,6 +874,8 @@ #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points //#define Z_AFTER_PROBING 5 // Z position after probing is done +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 #define Z_PROBE_OFFSET_RANGE_MAX 20 diff --git a/Marlin/example_configurations/delta/Hatchbox_Alpha/Configuration.h b/Marlin/example_configurations/delta/Hatchbox_Alpha/Configuration.h index a82dd101f..aedb9b356 100644 --- a/Marlin/example_configurations/delta/Hatchbox_Alpha/Configuration.h +++ b/Marlin/example_configurations/delta/Hatchbox_Alpha/Configuration.h @@ -876,6 +876,8 @@ #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points //#define Z_AFTER_PROBING 5 // Z position after probing is done +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 #define Z_PROBE_OFFSET_RANGE_MAX 20 diff --git a/Marlin/example_configurations/delta/generic/Configuration.h b/Marlin/example_configurations/delta/generic/Configuration.h index eb0356d5a..0cc4c2589 100644 --- a/Marlin/example_configurations/delta/generic/Configuration.h +++ b/Marlin/example_configurations/delta/generic/Configuration.h @@ -861,6 +861,8 @@ #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points //#define Z_AFTER_PROBING 5 // Z position after probing is done +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 #define Z_PROBE_OFFSET_RANGE_MAX 20 diff --git a/Marlin/example_configurations/delta/kossel_mini/Configuration.h b/Marlin/example_configurations/delta/kossel_mini/Configuration.h index 3c703c955..674cabac4 100644 --- a/Marlin/example_configurations/delta/kossel_mini/Configuration.h +++ b/Marlin/example_configurations/delta/kossel_mini/Configuration.h @@ -864,6 +864,8 @@ #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points //#define Z_AFTER_PROBING 5 // Z position after probing is done +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 #define Z_PROBE_OFFSET_RANGE_MAX 20 diff --git a/Marlin/example_configurations/delta/kossel_pro/Configuration.h b/Marlin/example_configurations/delta/kossel_pro/Configuration.h index 8cbe09f9c..4e5a4e245 100644 --- a/Marlin/example_configurations/delta/kossel_pro/Configuration.h +++ b/Marlin/example_configurations/delta/kossel_pro/Configuration.h @@ -863,8 +863,9 @@ #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points //#define Z_AFTER_PROBING 5 // Z position after probing is done -// For M851 give a range for adjusting the Z probe offset +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping +// For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -15 #define Z_PROBE_OFFSET_RANGE_MAX 5 diff --git a/Marlin/example_configurations/delta/kossel_xl/Configuration.h b/Marlin/example_configurations/delta/kossel_xl/Configuration.h index debfe7577..c22f01f0a 100644 --- a/Marlin/example_configurations/delta/kossel_xl/Configuration.h +++ b/Marlin/example_configurations/delta/kossel_xl/Configuration.h @@ -873,6 +873,8 @@ #define Z_CLEARANCE_BETWEEN_PROBES 10 // Z Clearance between probe points //#define Z_AFTER_PROBING 10 // Z position after probing is done +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 #define Z_PROBE_OFFSET_RANGE_MAX 20 diff --git a/Marlin/example_configurations/gCreate/gMax1.5+/Configuration.h b/Marlin/example_configurations/gCreate/gMax1.5+/Configuration.h index 4e04607ee..2064d5562 100644 --- a/Marlin/example_configurations/gCreate/gMax1.5+/Configuration.h +++ b/Marlin/example_configurations/gCreate/gMax1.5+/Configuration.h @@ -757,6 +757,8 @@ #define Z_CLEARANCE_BETWEEN_PROBES 6 // Z Clearance between probe points //#define Z_AFTER_PROBING 6 // Z position after probing is done +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 #define Z_PROBE_OFFSET_RANGE_MAX 20 diff --git a/Marlin/example_configurations/makibox/Configuration.h b/Marlin/example_configurations/makibox/Configuration.h index 68a916230..e8c25f997 100644 --- a/Marlin/example_configurations/makibox/Configuration.h +++ b/Marlin/example_configurations/makibox/Configuration.h @@ -747,6 +747,8 @@ #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points //#define Z_AFTER_PROBING 5 // Z position after probing is done +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 #define Z_PROBE_OFFSET_RANGE_MAX 20 diff --git a/Marlin/example_configurations/tvrrug/Round2/Configuration.h b/Marlin/example_configurations/tvrrug/Round2/Configuration.h index d0228acfb..02a37e8da 100644 --- a/Marlin/example_configurations/tvrrug/Round2/Configuration.h +++ b/Marlin/example_configurations/tvrrug/Round2/Configuration.h @@ -739,6 +739,8 @@ #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points //#define Z_AFTER_PROBING 5 // Z position after probing is done +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 #define Z_PROBE_OFFSET_RANGE_MAX 20 diff --git a/Marlin/example_configurations/wt150/Configuration.h b/Marlin/example_configurations/wt150/Configuration.h index 220d41cd1..73af0acdc 100644 --- a/Marlin/example_configurations/wt150/Configuration.h +++ b/Marlin/example_configurations/wt150/Configuration.h @@ -749,6 +749,8 @@ #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points //#define Z_AFTER_PROBING 5 // Z position after probing is done +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 #define Z_PROBE_OFFSET_RANGE_MAX 20