diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h
index 6fc957b66..bf74e73bb 100644
--- a/Marlin/Configuration_adv.h
+++ b/Marlin/Configuration_adv.h
@@ -1148,6 +1148,22 @@
    */
   //#define TMC_DEBUG
 
+  /**
+   * M915 Z Axis Calibration
+   *
+   * - Adjust Z stepper current,
+   * - Drive the Z axis to its physical maximum, and
+   * - Home Z to account for the lost steps.
+   *
+   * Use M915 Snn to specify the current.
+   * Use M925 Znn to add extra Z height to Z_MAX_POS.
+   */
+  //#define TMC_Z_CALIBRATION
+  #if ENABLED(TMC_Z_CALIBRATION)
+    #define CALIBRATION_CURRENT 250
+    #define CALIBRATION_EXTRA_HEIGHT 10
+  #endif
+
   /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
diff --git a/Marlin/example_configurations/AlephObjects/TAZ4/Configuration_adv.h b/Marlin/example_configurations/AlephObjects/TAZ4/Configuration_adv.h
index c8aeff89a..4f82ca403 100644
--- a/Marlin/example_configurations/AlephObjects/TAZ4/Configuration_adv.h
+++ b/Marlin/example_configurations/AlephObjects/TAZ4/Configuration_adv.h
@@ -1148,6 +1148,22 @@
    */
   //#define TMC_DEBUG
 
+  /**
+   * M915 Z Axis Calibration
+   *
+   * - Adjust Z stepper current,
+   * - Drive the Z axis to its physical maximum, and
+   * - Home Z to account for the lost steps.
+   *
+   * Use M915 Snn to specify the current.
+   * Use M925 Znn to add extra Z height to Z_MAX_POS.
+   */
+  //#define TMC_Z_CALIBRATION
+  #if ENABLED(TMC_Z_CALIBRATION)
+    #define CALIBRATION_CURRENT 250
+    #define CALIBRATION_EXTRA_HEIGHT 10
+  #endif
+
   /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
diff --git a/Marlin/example_configurations/Anet/A6/Configuration_adv.h b/Marlin/example_configurations/Anet/A6/Configuration_adv.h
index ee126a1f9..366ddb205 100644
--- a/Marlin/example_configurations/Anet/A6/Configuration_adv.h
+++ b/Marlin/example_configurations/Anet/A6/Configuration_adv.h
@@ -1148,6 +1148,22 @@
    */
   //#define TMC_DEBUG
 
+  /**
+   * M915 Z Axis Calibration
+   *
+   * - Adjust Z stepper current,
+   * - Drive the Z axis to its physical maximum, and
+   * - Home Z to account for the lost steps.
+   *
+   * Use M915 Snn to specify the current.
+   * Use M925 Znn to add extra Z height to Z_MAX_POS.
+   */
+  //#define TMC_Z_CALIBRATION
+  #if ENABLED(TMC_Z_CALIBRATION)
+    #define CALIBRATION_CURRENT 250
+    #define CALIBRATION_EXTRA_HEIGHT 10
+  #endif
+
   /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
diff --git a/Marlin/example_configurations/Anet/A8/Configuration_adv.h b/Marlin/example_configurations/Anet/A8/Configuration_adv.h
index cafd49be6..0a8a13c1c 100644
--- a/Marlin/example_configurations/Anet/A8/Configuration_adv.h
+++ b/Marlin/example_configurations/Anet/A8/Configuration_adv.h
@@ -1148,6 +1148,22 @@
    */
   //#define TMC_DEBUG
 
+  /**
+   * M915 Z Axis Calibration
+   *
+   * - Adjust Z stepper current,
+   * - Drive the Z axis to its physical maximum, and
+   * - Home Z to account for the lost steps.
+   *
+   * Use M915 Snn to specify the current.
+   * Use M925 Znn to add extra Z height to Z_MAX_POS.
+   */
+  //#define TMC_Z_CALIBRATION
+  #if ENABLED(TMC_Z_CALIBRATION)
+    #define CALIBRATION_CURRENT 250
+    #define CALIBRATION_EXTRA_HEIGHT 10
+  #endif
+
   /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
diff --git a/Marlin/example_configurations/BQ/Hephestos/Configuration_adv.h b/Marlin/example_configurations/BQ/Hephestos/Configuration_adv.h
index c23f74d70..74f5f80a0 100644
--- a/Marlin/example_configurations/BQ/Hephestos/Configuration_adv.h
+++ b/Marlin/example_configurations/BQ/Hephestos/Configuration_adv.h
@@ -1148,6 +1148,22 @@
    */
   //#define TMC_DEBUG
 
+  /**
+   * M915 Z Axis Calibration
+   *
+   * - Adjust Z stepper current,
+   * - Drive the Z axis to its physical maximum, and
+   * - Home Z to account for the lost steps.
+   *
+   * Use M915 Snn to specify the current.
+   * Use M925 Znn to add extra Z height to Z_MAX_POS.
+   */
+  //#define TMC_Z_CALIBRATION
+  #if ENABLED(TMC_Z_CALIBRATION)
+    #define CALIBRATION_CURRENT 250
+    #define CALIBRATION_EXTRA_HEIGHT 10
+  #endif
+
   /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
diff --git a/Marlin/example_configurations/BQ/Hephestos_2/Configuration_adv.h b/Marlin/example_configurations/BQ/Hephestos_2/Configuration_adv.h
index 617f3fad6..d89724923 100644
--- a/Marlin/example_configurations/BQ/Hephestos_2/Configuration_adv.h
+++ b/Marlin/example_configurations/BQ/Hephestos_2/Configuration_adv.h
@@ -1148,6 +1148,22 @@
    */
   //#define TMC_DEBUG
 
+  /**
+   * M915 Z Axis Calibration
+   *
+   * - Adjust Z stepper current,
+   * - Drive the Z axis to its physical maximum, and
+   * - Home Z to account for the lost steps.
+   *
+   * Use M915 Snn to specify the current.
+   * Use M925 Znn to add extra Z height to Z_MAX_POS.
+   */
+  //#define TMC_Z_CALIBRATION
+  #if ENABLED(TMC_Z_CALIBRATION)
+    #define CALIBRATION_CURRENT 250
+    #define CALIBRATION_EXTRA_HEIGHT 10
+  #endif
+
   /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
diff --git a/Marlin/example_configurations/BQ/WITBOX/Configuration_adv.h b/Marlin/example_configurations/BQ/WITBOX/Configuration_adv.h
index c23f74d70..74f5f80a0 100644
--- a/Marlin/example_configurations/BQ/WITBOX/Configuration_adv.h
+++ b/Marlin/example_configurations/BQ/WITBOX/Configuration_adv.h
@@ -1148,6 +1148,22 @@
    */
   //#define TMC_DEBUG
 
+  /**
+   * M915 Z Axis Calibration
+   *
+   * - Adjust Z stepper current,
+   * - Drive the Z axis to its physical maximum, and
+   * - Home Z to account for the lost steps.
+   *
+   * Use M915 Snn to specify the current.
+   * Use M925 Znn to add extra Z height to Z_MAX_POS.
+   */
+  //#define TMC_Z_CALIBRATION
+  #if ENABLED(TMC_Z_CALIBRATION)
+    #define CALIBRATION_CURRENT 250
+    #define CALIBRATION_EXTRA_HEIGHT 10
+  #endif
+
   /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
diff --git a/Marlin/example_configurations/Cartesio/Configuration_adv.h b/Marlin/example_configurations/Cartesio/Configuration_adv.h
index 844fe78a1..e17ab5272 100644
--- a/Marlin/example_configurations/Cartesio/Configuration_adv.h
+++ b/Marlin/example_configurations/Cartesio/Configuration_adv.h
@@ -1148,6 +1148,22 @@
    */
   //#define TMC_DEBUG
 
+  /**
+   * M915 Z Axis Calibration
+   *
+   * - Adjust Z stepper current,
+   * - Drive the Z axis to its physical maximum, and
+   * - Home Z to account for the lost steps.
+   *
+   * Use M915 Snn to specify the current.
+   * Use M925 Znn to add extra Z height to Z_MAX_POS.
+   */
+  //#define TMC_Z_CALIBRATION
+  #if ENABLED(TMC_Z_CALIBRATION)
+    #define CALIBRATION_CURRENT 250
+    #define CALIBRATION_EXTRA_HEIGHT 10
+  #endif
+
   /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
diff --git a/Marlin/example_configurations/Creality/CR-10/Configuration_adv.h b/Marlin/example_configurations/Creality/CR-10/Configuration_adv.h
index 4a0756102..13326f7c3 100755
--- a/Marlin/example_configurations/Creality/CR-10/Configuration_adv.h
+++ b/Marlin/example_configurations/Creality/CR-10/Configuration_adv.h
@@ -1148,6 +1148,22 @@
    */
   //#define TMC_DEBUG
 
+  /**
+   * M915 Z Axis Calibration
+   *
+   * - Adjust Z stepper current,
+   * - Drive the Z axis to its physical maximum, and
+   * - Home Z to account for the lost steps.
+   *
+   * Use M915 Snn to specify the current.
+   * Use M925 Znn to add extra Z height to Z_MAX_POS.
+   */
+  //#define TMC_Z_CALIBRATION
+  #if ENABLED(TMC_Z_CALIBRATION)
+    #define CALIBRATION_CURRENT 250
+    #define CALIBRATION_EXTRA_HEIGHT 10
+  #endif
+
   /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
diff --git a/Marlin/example_configurations/Felix/Configuration_adv.h b/Marlin/example_configurations/Felix/Configuration_adv.h
index 40cd6f922..760fe89a1 100644
--- a/Marlin/example_configurations/Felix/Configuration_adv.h
+++ b/Marlin/example_configurations/Felix/Configuration_adv.h
@@ -1148,6 +1148,22 @@
    */
   //#define TMC_DEBUG
 
+  /**
+   * M915 Z Axis Calibration
+   *
+   * - Adjust Z stepper current,
+   * - Drive the Z axis to its physical maximum, and
+   * - Home Z to account for the lost steps.
+   *
+   * Use M915 Snn to specify the current.
+   * Use M925 Znn to add extra Z height to Z_MAX_POS.
+   */
+  //#define TMC_Z_CALIBRATION
+  #if ENABLED(TMC_Z_CALIBRATION)
+    #define CALIBRATION_CURRENT 250
+    #define CALIBRATION_EXTRA_HEIGHT 10
+  #endif
+
   /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
diff --git a/Marlin/example_configurations/FolgerTech/i3-2020/Configuration_adv.h b/Marlin/example_configurations/FolgerTech/i3-2020/Configuration_adv.h
index 86a6256ac..cad997daf 100644
--- a/Marlin/example_configurations/FolgerTech/i3-2020/Configuration_adv.h
+++ b/Marlin/example_configurations/FolgerTech/i3-2020/Configuration_adv.h
@@ -1148,6 +1148,22 @@
    */
   //#define TMC_DEBUG
 
+  /**
+   * M915 Z Axis Calibration
+   *
+   * - Adjust Z stepper current,
+   * - Drive the Z axis to its physical maximum, and
+   * - Home Z to account for the lost steps.
+   *
+   * Use M915 Snn to specify the current.
+   * Use M925 Znn to add extra Z height to Z_MAX_POS.
+   */
+  //#define TMC_Z_CALIBRATION
+  #if ENABLED(TMC_Z_CALIBRATION)
+    #define CALIBRATION_CURRENT 250
+    #define CALIBRATION_EXTRA_HEIGHT 10
+  #endif
+
   /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
diff --git a/Marlin/example_configurations/Infitary/i3-M508/Configuration_adv.h b/Marlin/example_configurations/Infitary/i3-M508/Configuration_adv.h
index aeca0dbb7..73ab61f38 100644
--- a/Marlin/example_configurations/Infitary/i3-M508/Configuration_adv.h
+++ b/Marlin/example_configurations/Infitary/i3-M508/Configuration_adv.h
@@ -1148,6 +1148,22 @@
    */
   //#define TMC_DEBUG
 
+  /**
+   * M915 Z Axis Calibration
+   *
+   * - Adjust Z stepper current,
+   * - Drive the Z axis to its physical maximum, and
+   * - Home Z to account for the lost steps.
+   *
+   * Use M915 Snn to specify the current.
+   * Use M925 Znn to add extra Z height to Z_MAX_POS.
+   */
+  //#define TMC_Z_CALIBRATION
+  #if ENABLED(TMC_Z_CALIBRATION)
+    #define CALIBRATION_CURRENT 250
+    #define CALIBRATION_EXTRA_HEIGHT 10
+  #endif
+
   /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
diff --git a/Marlin/example_configurations/Malyan/M150/Configuration_adv.h b/Marlin/example_configurations/Malyan/M150/Configuration_adv.h
index b7acef821..92236152a 100644
--- a/Marlin/example_configurations/Malyan/M150/Configuration_adv.h
+++ b/Marlin/example_configurations/Malyan/M150/Configuration_adv.h
@@ -1148,6 +1148,22 @@
    */
   //#define TMC_DEBUG
 
+  /**
+   * M915 Z Axis Calibration
+   *
+   * - Adjust Z stepper current,
+   * - Drive the Z axis to its physical maximum, and
+   * - Home Z to account for the lost steps.
+   *
+   * Use M915 Snn to specify the current.
+   * Use M925 Znn to add extra Z height to Z_MAX_POS.
+   */
+  //#define TMC_Z_CALIBRATION
+  #if ENABLED(TMC_Z_CALIBRATION)
+    #define CALIBRATION_CURRENT 250
+    #define CALIBRATION_EXTRA_HEIGHT 10
+  #endif
+
   /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
diff --git a/Marlin/example_configurations/Micromake/C1/enhanced/Configuration_adv.h b/Marlin/example_configurations/Micromake/C1/enhanced/Configuration_adv.h
index 40f8b6d2f..0438c4308 100644
--- a/Marlin/example_configurations/Micromake/C1/enhanced/Configuration_adv.h
+++ b/Marlin/example_configurations/Micromake/C1/enhanced/Configuration_adv.h
@@ -1149,6 +1149,22 @@
    */
   //#define TMC_DEBUG
 
+  /**
+   * M915 Z Axis Calibration
+   *
+   * - Adjust Z stepper current,
+   * - Drive the Z axis to its physical maximum, and
+   * - Home Z to account for the lost steps.
+   *
+   * Use M915 Snn to specify the current.
+   * Use M925 Znn to add extra Z height to Z_MAX_POS.
+   */
+  //#define TMC_Z_CALIBRATION
+  #if ENABLED(TMC_Z_CALIBRATION)
+    #define CALIBRATION_CURRENT 250
+    #define CALIBRATION_EXTRA_HEIGHT 10
+  #endif
+
   /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
diff --git a/Marlin/example_configurations/RigidBot/Configuration_adv.h b/Marlin/example_configurations/RigidBot/Configuration_adv.h
index bb4e6032a..2ccbf68a3 100644
--- a/Marlin/example_configurations/RigidBot/Configuration_adv.h
+++ b/Marlin/example_configurations/RigidBot/Configuration_adv.h
@@ -1148,6 +1148,22 @@
    */
   //#define TMC_DEBUG
 
+  /**
+   * M915 Z Axis Calibration
+   *
+   * - Adjust Z stepper current,
+   * - Drive the Z axis to its physical maximum, and
+   * - Home Z to account for the lost steps.
+   *
+   * Use M915 Snn to specify the current.
+   * Use M925 Znn to add extra Z height to Z_MAX_POS.
+   */
+  //#define TMC_Z_CALIBRATION
+  #if ENABLED(TMC_Z_CALIBRATION)
+    #define CALIBRATION_CURRENT 250
+    #define CALIBRATION_EXTRA_HEIGHT 10
+  #endif
+
   /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
diff --git a/Marlin/example_configurations/SCARA/Configuration_adv.h b/Marlin/example_configurations/SCARA/Configuration_adv.h
index 840452836..3566a337c 100644
--- a/Marlin/example_configurations/SCARA/Configuration_adv.h
+++ b/Marlin/example_configurations/SCARA/Configuration_adv.h
@@ -1148,6 +1148,22 @@
    */
   //#define TMC_DEBUG
 
+  /**
+   * M915 Z Axis Calibration
+   *
+   * - Adjust Z stepper current,
+   * - Drive the Z axis to its physical maximum, and
+   * - Home Z to account for the lost steps.
+   *
+   * Use M915 Snn to specify the current.
+   * Use M925 Znn to add extra Z height to Z_MAX_POS.
+   */
+  //#define TMC_Z_CALIBRATION
+  #if ENABLED(TMC_Z_CALIBRATION)
+    #define CALIBRATION_CURRENT 250
+    #define CALIBRATION_EXTRA_HEIGHT 10
+  #endif
+
   /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
diff --git a/Marlin/example_configurations/Sanguinololu/Configuration_adv.h b/Marlin/example_configurations/Sanguinololu/Configuration_adv.h
index d33b7aa4a..222d4418d 100644
--- a/Marlin/example_configurations/Sanguinololu/Configuration_adv.h
+++ b/Marlin/example_configurations/Sanguinololu/Configuration_adv.h
@@ -1137,6 +1137,22 @@
    */
   //#define TMC_DEBUG
 
+  /**
+   * M915 Z Axis Calibration
+   *
+   * - Adjust Z stepper current,
+   * - Drive the Z axis to its physical maximum, and
+   * - Home Z to account for the lost steps.
+   *
+   * Use M915 Snn to specify the current.
+   * Use M925 Znn to add extra Z height to Z_MAX_POS.
+   */
+  //#define TMC_Z_CALIBRATION
+  #if ENABLED(TMC_Z_CALIBRATION)
+    #define CALIBRATION_CURRENT 250
+    #define CALIBRATION_EXTRA_HEIGHT 10
+  #endif
+
   /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
diff --git a/Marlin/example_configurations/TinyBoy2/Configuration_adv.h b/Marlin/example_configurations/TinyBoy2/Configuration_adv.h
index 6645a3a9e..207eb7c96 100644
--- a/Marlin/example_configurations/TinyBoy2/Configuration_adv.h
+++ b/Marlin/example_configurations/TinyBoy2/Configuration_adv.h
@@ -1148,6 +1148,22 @@
    */
   //#define TMC_DEBUG
 
+  /**
+   * M915 Z Axis Calibration
+   *
+   * - Adjust Z stepper current,
+   * - Drive the Z axis to its physical maximum, and
+   * - Home Z to account for the lost steps.
+   *
+   * Use M915 Snn to specify the current.
+   * Use M925 Znn to add extra Z height to Z_MAX_POS.
+   */
+  //#define TMC_Z_CALIBRATION
+  #if ENABLED(TMC_Z_CALIBRATION)
+    #define CALIBRATION_CURRENT 250
+    #define CALIBRATION_EXTRA_HEIGHT 10
+  #endif
+
   /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
diff --git a/Marlin/example_configurations/Velleman/K8200/Configuration_adv.h b/Marlin/example_configurations/Velleman/K8200/Configuration_adv.h
index 7c51a7769..a0601cab8 100644
--- a/Marlin/example_configurations/Velleman/K8200/Configuration_adv.h
+++ b/Marlin/example_configurations/Velleman/K8200/Configuration_adv.h
@@ -1159,6 +1159,22 @@
    */
   //#define TMC_DEBUG
 
+  /**
+   * M915 Z Axis Calibration
+   *
+   * - Adjust Z stepper current,
+   * - Drive the Z axis to its physical maximum, and
+   * - Home Z to account for the lost steps.
+   *
+   * Use M915 Snn to specify the current.
+   * Use M925 Znn to add extra Z height to Z_MAX_POS.
+   */
+  //#define TMC_Z_CALIBRATION
+  #if ENABLED(TMC_Z_CALIBRATION)
+    #define CALIBRATION_CURRENT 250
+    #define CALIBRATION_EXTRA_HEIGHT 10
+  #endif
+
   /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
diff --git a/Marlin/example_configurations/Velleman/K8400/Configuration_adv.h b/Marlin/example_configurations/Velleman/K8400/Configuration_adv.h
index e6a08cb4c..1bca17561 100644
--- a/Marlin/example_configurations/Velleman/K8400/Configuration_adv.h
+++ b/Marlin/example_configurations/Velleman/K8400/Configuration_adv.h
@@ -1148,6 +1148,22 @@
    */
   //#define TMC_DEBUG
 
+  /**
+   * M915 Z Axis Calibration
+   *
+   * - Adjust Z stepper current,
+   * - Drive the Z axis to its physical maximum, and
+   * - Home Z to account for the lost steps.
+   *
+   * Use M915 Snn to specify the current.
+   * Use M925 Znn to add extra Z height to Z_MAX_POS.
+   */
+  //#define TMC_Z_CALIBRATION
+  #if ENABLED(TMC_Z_CALIBRATION)
+    #define CALIBRATION_CURRENT 250
+    #define CALIBRATION_EXTRA_HEIGHT 10
+  #endif
+
   /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
diff --git a/Marlin/example_configurations/Wanhao/Duplicator 6/Configuration_adv.h b/Marlin/example_configurations/Wanhao/Duplicator 6/Configuration_adv.h
index fe7ede718..a44f1fcf4 100644
--- a/Marlin/example_configurations/Wanhao/Duplicator 6/Configuration_adv.h	
+++ b/Marlin/example_configurations/Wanhao/Duplicator 6/Configuration_adv.h	
@@ -1150,6 +1150,22 @@
    */
   //#define TMC_DEBUG
 
+  /**
+   * M915 Z Axis Calibration
+   *
+   * - Adjust Z stepper current,
+   * - Drive the Z axis to its physical maximum, and
+   * - Home Z to account for the lost steps.
+   *
+   * Use M915 Snn to specify the current.
+   * Use M925 Znn to add extra Z height to Z_MAX_POS.
+   */
+  //#define TMC_Z_CALIBRATION
+  #if ENABLED(TMC_Z_CALIBRATION)
+    #define CALIBRATION_CURRENT 250
+    #define CALIBRATION_EXTRA_HEIGHT 10
+  #endif
+
   /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
diff --git a/Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration_adv.h b/Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration_adv.h
index 981054b6f..a7ac0da82 100644
--- a/Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration_adv.h
@@ -1150,6 +1150,22 @@
    */
   //#define TMC_DEBUG
 
+  /**
+   * M915 Z Axis Calibration
+   *
+   * - Adjust Z stepper current,
+   * - Drive the Z axis to its physical maximum, and
+   * - Home Z to account for the lost steps.
+   *
+   * Use M915 Snn to specify the current.
+   * Use M925 Znn to add extra Z height to Z_MAX_POS.
+   */
+  //#define TMC_Z_CALIBRATION
+  #if ENABLED(TMC_Z_CALIBRATION)
+    #define CALIBRATION_CURRENT 250
+    #define CALIBRATION_EXTRA_HEIGHT 10
+  #endif
+
   /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
diff --git a/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration_adv.h b/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration_adv.h
index 15f695577..6a8fb8839 100644
--- a/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration_adv.h
@@ -1150,6 +1150,22 @@
    */
   //#define TMC_DEBUG
 
+  /**
+   * M915 Z Axis Calibration
+   *
+   * - Adjust Z stepper current,
+   * - Drive the Z axis to its physical maximum, and
+   * - Home Z to account for the lost steps.
+   *
+   * Use M915 Snn to specify the current.
+   * Use M925 Znn to add extra Z height to Z_MAX_POS.
+   */
+  //#define TMC_Z_CALIBRATION
+  #if ENABLED(TMC_Z_CALIBRATION)
+    #define CALIBRATION_CURRENT 250
+    #define CALIBRATION_EXTRA_HEIGHT 10
+  #endif
+
   /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
diff --git a/Marlin/example_configurations/delta/generic/Configuration_adv.h b/Marlin/example_configurations/delta/generic/Configuration_adv.h
index 15f695577..6a8fb8839 100644
--- a/Marlin/example_configurations/delta/generic/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/generic/Configuration_adv.h
@@ -1150,6 +1150,22 @@
    */
   //#define TMC_DEBUG
 
+  /**
+   * M915 Z Axis Calibration
+   *
+   * - Adjust Z stepper current,
+   * - Drive the Z axis to its physical maximum, and
+   * - Home Z to account for the lost steps.
+   *
+   * Use M915 Snn to specify the current.
+   * Use M925 Znn to add extra Z height to Z_MAX_POS.
+   */
+  //#define TMC_Z_CALIBRATION
+  #if ENABLED(TMC_Z_CALIBRATION)
+    #define CALIBRATION_CURRENT 250
+    #define CALIBRATION_EXTRA_HEIGHT 10
+  #endif
+
   /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
diff --git a/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h b/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h
index 15f695577..6a8fb8839 100644
--- a/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h
@@ -1150,6 +1150,22 @@
    */
   //#define TMC_DEBUG
 
+  /**
+   * M915 Z Axis Calibration
+   *
+   * - Adjust Z stepper current,
+   * - Drive the Z axis to its physical maximum, and
+   * - Home Z to account for the lost steps.
+   *
+   * Use M915 Snn to specify the current.
+   * Use M925 Znn to add extra Z height to Z_MAX_POS.
+   */
+  //#define TMC_Z_CALIBRATION
+  #if ENABLED(TMC_Z_CALIBRATION)
+    #define CALIBRATION_CURRENT 250
+    #define CALIBRATION_EXTRA_HEIGHT 10
+  #endif
+
   /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
diff --git a/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h b/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h
index 73cbeb189..a85b09d29 100644
--- a/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h
@@ -1155,6 +1155,22 @@
    */
   //#define TMC_DEBUG
 
+  /**
+   * M915 Z Axis Calibration
+   *
+   * - Adjust Z stepper current,
+   * - Drive the Z axis to its physical maximum, and
+   * - Home Z to account for the lost steps.
+   *
+   * Use M915 Snn to specify the current.
+   * Use M925 Znn to add extra Z height to Z_MAX_POS.
+   */
+  //#define TMC_Z_CALIBRATION
+  #if ENABLED(TMC_Z_CALIBRATION)
+    #define CALIBRATION_CURRENT 250
+    #define CALIBRATION_EXTRA_HEIGHT 10
+  #endif
+
   /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
diff --git a/Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h b/Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h
index 0728078fc..ca0394080 100644
--- a/Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h
@@ -1150,6 +1150,22 @@
    */
   //#define TMC_DEBUG
 
+  /**
+   * M915 Z Axis Calibration
+   *
+   * - Adjust Z stepper current,
+   * - Drive the Z axis to its physical maximum, and
+   * - Home Z to account for the lost steps.
+   *
+   * Use M915 Snn to specify the current.
+   * Use M925 Znn to add extra Z height to Z_MAX_POS.
+   */
+  //#define TMC_Z_CALIBRATION
+  #if ENABLED(TMC_Z_CALIBRATION)
+    #define CALIBRATION_CURRENT 250
+    #define CALIBRATION_EXTRA_HEIGHT 10
+  #endif
+
   /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
diff --git a/Marlin/example_configurations/gCreate/gMax1.5+/Configuration_adv.h b/Marlin/example_configurations/gCreate/gMax1.5+/Configuration_adv.h
index 2f8e65438..f2a1a77e6 100644
--- a/Marlin/example_configurations/gCreate/gMax1.5+/Configuration_adv.h
+++ b/Marlin/example_configurations/gCreate/gMax1.5+/Configuration_adv.h
@@ -1148,6 +1148,22 @@
    */
   //#define TMC_DEBUG
 
+  /**
+   * M915 Z Axis Calibration
+   *
+   * - Adjust Z stepper current,
+   * - Drive the Z axis to its physical maximum, and
+   * - Home Z to account for the lost steps.
+   *
+   * Use M915 Snn to specify the current.
+   * Use M925 Znn to add extra Z height to Z_MAX_POS.
+   */
+  //#define TMC_Z_CALIBRATION
+  #if ENABLED(TMC_Z_CALIBRATION)
+    #define CALIBRATION_CURRENT 250
+    #define CALIBRATION_EXTRA_HEIGHT 10
+  #endif
+
   /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
diff --git a/Marlin/example_configurations/makibox/Configuration_adv.h b/Marlin/example_configurations/makibox/Configuration_adv.h
index 75a54e763..bc39d41ae 100644
--- a/Marlin/example_configurations/makibox/Configuration_adv.h
+++ b/Marlin/example_configurations/makibox/Configuration_adv.h
@@ -1148,6 +1148,22 @@
    */
   //#define TMC_DEBUG
 
+  /**
+   * M915 Z Axis Calibration
+   *
+   * - Adjust Z stepper current,
+   * - Drive the Z axis to its physical maximum, and
+   * - Home Z to account for the lost steps.
+   *
+   * Use M915 Snn to specify the current.
+   * Use M925 Znn to add extra Z height to Z_MAX_POS.
+   */
+  //#define TMC_Z_CALIBRATION
+  #if ENABLED(TMC_Z_CALIBRATION)
+    #define CALIBRATION_CURRENT 250
+    #define CALIBRATION_EXTRA_HEIGHT 10
+  #endif
+
   /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
diff --git a/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h b/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h
index 99498dc02..dd357bb9e 100644
--- a/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h
+++ b/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h
@@ -1148,6 +1148,22 @@
    */
   //#define TMC_DEBUG
 
+  /**
+   * M915 Z Axis Calibration
+   *
+   * - Adjust Z stepper current,
+   * - Drive the Z axis to its physical maximum, and
+   * - Home Z to account for the lost steps.
+   *
+   * Use M915 Snn to specify the current.
+   * Use M925 Znn to add extra Z height to Z_MAX_POS.
+   */
+  //#define TMC_Z_CALIBRATION
+  #if ENABLED(TMC_Z_CALIBRATION)
+    #define CALIBRATION_CURRENT 250
+    #define CALIBRATION_EXTRA_HEIGHT 10
+  #endif
+
   /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
diff --git a/Marlin/example_configurations/wt150/Configuration_adv.h b/Marlin/example_configurations/wt150/Configuration_adv.h
index 591329960..d9c96e3c3 100644
--- a/Marlin/example_configurations/wt150/Configuration_adv.h
+++ b/Marlin/example_configurations/wt150/Configuration_adv.h
@@ -1149,6 +1149,22 @@
    */
   //#define TMC_DEBUG
 
+  /**
+   * M915 Z Axis Calibration
+   *
+   * - Adjust Z stepper current,
+   * - Drive the Z axis to its physical maximum, and
+   * - Home Z to account for the lost steps.
+   *
+   * Use M915 Snn to specify the current.
+   * Use M925 Znn to add extra Z height to Z_MAX_POS.
+   */
+  //#define TMC_Z_CALIBRATION
+  #if ENABLED(TMC_Z_CALIBRATION)
+    #define CALIBRATION_CURRENT 250
+    #define CALIBRATION_EXTRA_HEIGHT 10
+  #endif
+
   /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page