diff --git a/Marlin/example_configurations/AlephObjects/TAZ4/Configuration_adv.h b/Marlin/example_configurations/AlephObjects/TAZ4/Configuration_adv.h
index d08753f4b..bd6dca904 100644
--- a/Marlin/example_configurations/AlephObjects/TAZ4/Configuration_adv.h
+++ b/Marlin/example_configurations/AlephObjects/TAZ4/Configuration_adv.h
@@ -656,6 +656,22 @@
   // Swap the CW/CCW indicators in the graphics overlay
   //#define OVERLAY_GFX_REVERSE
 
+  #if ENABLED(U8GLIB_ST7920)
+    /**
+     * ST7920-based LCDs can emulate a 16 x 4 character display using
+     * the ST7920 character-generator for very fast screen updates.
+     * Enable LIGHTWEIGHT_UI to use this special display mode.
+     *
+     * Since LIGHTWEIGHT_UI has limited space, the position and status
+     * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
+     * length of time to display the status message before clearing.
+     */
+    //#define LIGHTWEIGHT_UI
+    #if ENABLED(LIGHTWEIGHT_UI)
+      #define STATUS_EXPIRE_SECONDS 20
+    #endif
+  #endif
+
 #endif // DOGLCD
 
 // @section safety
diff --git a/Marlin/example_configurations/Anet/A6/Configuration_adv.h b/Marlin/example_configurations/Anet/A6/Configuration_adv.h
index 97101e741..8f41bc404 100644
--- a/Marlin/example_configurations/Anet/A6/Configuration_adv.h
+++ b/Marlin/example_configurations/Anet/A6/Configuration_adv.h
@@ -656,6 +656,22 @@
   // Swap the CW/CCW indicators in the graphics overlay
   //#define OVERLAY_GFX_REVERSE
 
+  #if ENABLED(U8GLIB_ST7920)
+    /**
+     * ST7920-based LCDs can emulate a 16 x 4 character display using
+     * the ST7920 character-generator for very fast screen updates.
+     * Enable LIGHTWEIGHT_UI to use this special display mode.
+     *
+     * Since LIGHTWEIGHT_UI has limited space, the position and status
+     * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
+     * length of time to display the status message before clearing.
+     */
+    //#define LIGHTWEIGHT_UI
+    #if ENABLED(LIGHTWEIGHT_UI)
+      #define STATUS_EXPIRE_SECONDS 20
+    #endif
+  #endif
+
 #endif // DOGLCD
 
 // @section safety
diff --git a/Marlin/example_configurations/Anet/A8/Configuration_adv.h b/Marlin/example_configurations/Anet/A8/Configuration_adv.h
index c95ad8deb..6ca200d6c 100644
--- a/Marlin/example_configurations/Anet/A8/Configuration_adv.h
+++ b/Marlin/example_configurations/Anet/A8/Configuration_adv.h
@@ -656,6 +656,22 @@
   // Swap the CW/CCW indicators in the graphics overlay
   //#define OVERLAY_GFX_REVERSE
 
+  #if ENABLED(U8GLIB_ST7920)
+    /**
+     * ST7920-based LCDs can emulate a 16 x 4 character display using
+     * the ST7920 character-generator for very fast screen updates.
+     * Enable LIGHTWEIGHT_UI to use this special display mode.
+     *
+     * Since LIGHTWEIGHT_UI has limited space, the position and status
+     * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
+     * length of time to display the status message before clearing.
+     */
+    //#define LIGHTWEIGHT_UI
+    #if ENABLED(LIGHTWEIGHT_UI)
+      #define STATUS_EXPIRE_SECONDS 20
+    #endif
+  #endif
+
 #endif // DOGLCD
 
 // @section safety
diff --git a/Marlin/example_configurations/BIBO/TouchX/Configuration_adv.h b/Marlin/example_configurations/BIBO/TouchX/Configuration_adv.h
index 89ea1b8e5..3e07dadfc 100644
--- a/Marlin/example_configurations/BIBO/TouchX/Configuration_adv.h
+++ b/Marlin/example_configurations/BIBO/TouchX/Configuration_adv.h
@@ -656,6 +656,22 @@
   // Swap the CW/CCW indicators in the graphics overlay
   //#define OVERLAY_GFX_REVERSE
 
+  #if ENABLED(U8GLIB_ST7920)
+    /**
+     * ST7920-based LCDs can emulate a 16 x 4 character display using
+     * the ST7920 character-generator for very fast screen updates.
+     * Enable LIGHTWEIGHT_UI to use this special display mode.
+     *
+     * Since LIGHTWEIGHT_UI has limited space, the position and status
+     * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
+     * length of time to display the status message before clearing.
+     */
+    //#define LIGHTWEIGHT_UI
+    #if ENABLED(LIGHTWEIGHT_UI)
+      #define STATUS_EXPIRE_SECONDS 20
+    #endif
+  #endif
+
 #endif // DOGLCD
 
 // @section safety
diff --git a/Marlin/example_configurations/BQ/Hephestos/Configuration_adv.h b/Marlin/example_configurations/BQ/Hephestos/Configuration_adv.h
index bdd08752d..a2d7e3c9b 100644
--- a/Marlin/example_configurations/BQ/Hephestos/Configuration_adv.h
+++ b/Marlin/example_configurations/BQ/Hephestos/Configuration_adv.h
@@ -656,6 +656,22 @@
   // Swap the CW/CCW indicators in the graphics overlay
   //#define OVERLAY_GFX_REVERSE
 
+  #if ENABLED(U8GLIB_ST7920)
+    /**
+     * ST7920-based LCDs can emulate a 16 x 4 character display using
+     * the ST7920 character-generator for very fast screen updates.
+     * Enable LIGHTWEIGHT_UI to use this special display mode.
+     *
+     * Since LIGHTWEIGHT_UI has limited space, the position and status
+     * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
+     * length of time to display the status message before clearing.
+     */
+    //#define LIGHTWEIGHT_UI
+    #if ENABLED(LIGHTWEIGHT_UI)
+      #define STATUS_EXPIRE_SECONDS 20
+    #endif
+  #endif
+
 #endif // DOGLCD
 
 // @section safety
diff --git a/Marlin/example_configurations/BQ/Hephestos_2/Configuration_adv.h b/Marlin/example_configurations/BQ/Hephestos_2/Configuration_adv.h
index 8247d8949..276deab2d 100644
--- a/Marlin/example_configurations/BQ/Hephestos_2/Configuration_adv.h
+++ b/Marlin/example_configurations/BQ/Hephestos_2/Configuration_adv.h
@@ -656,6 +656,22 @@
   // Swap the CW/CCW indicators in the graphics overlay
   //#define OVERLAY_GFX_REVERSE
 
+  #if ENABLED(U8GLIB_ST7920)
+    /**
+     * ST7920-based LCDs can emulate a 16 x 4 character display using
+     * the ST7920 character-generator for very fast screen updates.
+     * Enable LIGHTWEIGHT_UI to use this special display mode.
+     *
+     * Since LIGHTWEIGHT_UI has limited space, the position and status
+     * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
+     * length of time to display the status message before clearing.
+     */
+    //#define LIGHTWEIGHT_UI
+    #if ENABLED(LIGHTWEIGHT_UI)
+      #define STATUS_EXPIRE_SECONDS 20
+    #endif
+  #endif
+
 #endif // DOGLCD
 
 // @section safety
diff --git a/Marlin/example_configurations/BQ/WITBOX/Configuration_adv.h b/Marlin/example_configurations/BQ/WITBOX/Configuration_adv.h
index bdd08752d..a2d7e3c9b 100644
--- a/Marlin/example_configurations/BQ/WITBOX/Configuration_adv.h
+++ b/Marlin/example_configurations/BQ/WITBOX/Configuration_adv.h
@@ -656,6 +656,22 @@
   // Swap the CW/CCW indicators in the graphics overlay
   //#define OVERLAY_GFX_REVERSE
 
+  #if ENABLED(U8GLIB_ST7920)
+    /**
+     * ST7920-based LCDs can emulate a 16 x 4 character display using
+     * the ST7920 character-generator for very fast screen updates.
+     * Enable LIGHTWEIGHT_UI to use this special display mode.
+     *
+     * Since LIGHTWEIGHT_UI has limited space, the position and status
+     * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
+     * length of time to display the status message before clearing.
+     */
+    //#define LIGHTWEIGHT_UI
+    #if ENABLED(LIGHTWEIGHT_UI)
+      #define STATUS_EXPIRE_SECONDS 20
+    #endif
+  #endif
+
 #endif // DOGLCD
 
 // @section safety
diff --git a/Marlin/example_configurations/Cartesio/Configuration_adv.h b/Marlin/example_configurations/Cartesio/Configuration_adv.h
index d59b4a80a..03e81f43d 100644
--- a/Marlin/example_configurations/Cartesio/Configuration_adv.h
+++ b/Marlin/example_configurations/Cartesio/Configuration_adv.h
@@ -656,6 +656,22 @@
   // Swap the CW/CCW indicators in the graphics overlay
   //#define OVERLAY_GFX_REVERSE
 
+  #if ENABLED(U8GLIB_ST7920)
+    /**
+     * ST7920-based LCDs can emulate a 16 x 4 character display using
+     * the ST7920 character-generator for very fast screen updates.
+     * Enable LIGHTWEIGHT_UI to use this special display mode.
+     *
+     * Since LIGHTWEIGHT_UI has limited space, the position and status
+     * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
+     * length of time to display the status message before clearing.
+     */
+    //#define LIGHTWEIGHT_UI
+    #if ENABLED(LIGHTWEIGHT_UI)
+      #define STATUS_EXPIRE_SECONDS 20
+    #endif
+  #endif
+
 #endif // DOGLCD
 
 // @section safety
diff --git a/Marlin/example_configurations/Creality/CR-10/Configuration_adv.h b/Marlin/example_configurations/Creality/CR-10/Configuration_adv.h
index f7a8dedbf..e94467696 100755
--- a/Marlin/example_configurations/Creality/CR-10/Configuration_adv.h
+++ b/Marlin/example_configurations/Creality/CR-10/Configuration_adv.h
@@ -656,6 +656,22 @@
   // Swap the CW/CCW indicators in the graphics overlay
   //#define OVERLAY_GFX_REVERSE
 
+  #if ENABLED(U8GLIB_ST7920)
+    /**
+     * ST7920-based LCDs can emulate a 16 x 4 character display using
+     * the ST7920 character-generator for very fast screen updates.
+     * Enable LIGHTWEIGHT_UI to use this special display mode.
+     *
+     * Since LIGHTWEIGHT_UI has limited space, the position and status
+     * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
+     * length of time to display the status message before clearing.
+     */
+    //#define LIGHTWEIGHT_UI
+    #if ENABLED(LIGHTWEIGHT_UI)
+      #define STATUS_EXPIRE_SECONDS 20
+    #endif
+  #endif
+
 #endif // DOGLCD
 
 // @section safety
diff --git a/Marlin/example_configurations/Creality/CR-10S/Configuration_adv.h b/Marlin/example_configurations/Creality/CR-10S/Configuration_adv.h
index 8e4e7e91d..78575db19 100644
--- a/Marlin/example_configurations/Creality/CR-10S/Configuration_adv.h
+++ b/Marlin/example_configurations/Creality/CR-10S/Configuration_adv.h
@@ -656,6 +656,22 @@
   // Swap the CW/CCW indicators in the graphics overlay
   //#define OVERLAY_GFX_REVERSE
 
+  #if ENABLED(U8GLIB_ST7920)
+    /**
+     * ST7920-based LCDs can emulate a 16 x 4 character display using
+     * the ST7920 character-generator for very fast screen updates.
+     * Enable LIGHTWEIGHT_UI to use this special display mode.
+     *
+     * Since LIGHTWEIGHT_UI has limited space, the position and status
+     * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
+     * length of time to display the status message before clearing.
+     */
+    //#define LIGHTWEIGHT_UI
+    #if ENABLED(LIGHTWEIGHT_UI)
+      #define STATUS_EXPIRE_SECONDS 20
+    #endif
+  #endif
+
 #endif // DOGLCD
 
 // @section safety
diff --git a/Marlin/example_configurations/Creality/CR-10mini/Configuration_adv.h b/Marlin/example_configurations/Creality/CR-10mini/Configuration_adv.h
index d9b87e014..65bf59315 100644
--- a/Marlin/example_configurations/Creality/CR-10mini/Configuration_adv.h
+++ b/Marlin/example_configurations/Creality/CR-10mini/Configuration_adv.h
@@ -656,6 +656,22 @@
   // Swap the CW/CCW indicators in the graphics overlay
   //#define OVERLAY_GFX_REVERSE
 
+  #if ENABLED(U8GLIB_ST7920)
+    /**
+     * ST7920-based LCDs can emulate a 16 x 4 character display using
+     * the ST7920 character-generator for very fast screen updates.
+     * Enable LIGHTWEIGHT_UI to use this special display mode.
+     *
+     * Since LIGHTWEIGHT_UI has limited space, the position and status
+     * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
+     * length of time to display the status message before clearing.
+     */
+    //#define LIGHTWEIGHT_UI
+    #if ENABLED(LIGHTWEIGHT_UI)
+      #define STATUS_EXPIRE_SECONDS 20
+    #endif
+  #endif
+
 #endif // DOGLCD
 
 // @section safety
diff --git a/Marlin/example_configurations/Creality/Ender/Configuration_adv.h b/Marlin/example_configurations/Creality/Ender/Configuration_adv.h
index 095f69368..b3c41233f 100644
--- a/Marlin/example_configurations/Creality/Ender/Configuration_adv.h
+++ b/Marlin/example_configurations/Creality/Ender/Configuration_adv.h
@@ -656,6 +656,22 @@
   // Swap the CW/CCW indicators in the graphics overlay
   //#define OVERLAY_GFX_REVERSE
 
+  #if ENABLED(U8GLIB_ST7920)
+    /**
+     * ST7920-based LCDs can emulate a 16 x 4 character display using
+     * the ST7920 character-generator for very fast screen updates.
+     * Enable LIGHTWEIGHT_UI to use this special display mode.
+     *
+     * Since LIGHTWEIGHT_UI has limited space, the position and status
+     * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
+     * length of time to display the status message before clearing.
+     */
+    //#define LIGHTWEIGHT_UI
+    #if ENABLED(LIGHTWEIGHT_UI)
+      #define STATUS_EXPIRE_SECONDS 20
+    #endif
+  #endif
+
 #endif // DOGLCD
 
 // @section safety
diff --git a/Marlin/example_configurations/Felix/Configuration_adv.h b/Marlin/example_configurations/Felix/Configuration_adv.h
index 8afafad56..71d947360 100644
--- a/Marlin/example_configurations/Felix/Configuration_adv.h
+++ b/Marlin/example_configurations/Felix/Configuration_adv.h
@@ -656,6 +656,22 @@
   // Swap the CW/CCW indicators in the graphics overlay
   //#define OVERLAY_GFX_REVERSE
 
+  #if ENABLED(U8GLIB_ST7920)
+    /**
+     * ST7920-based LCDs can emulate a 16 x 4 character display using
+     * the ST7920 character-generator for very fast screen updates.
+     * Enable LIGHTWEIGHT_UI to use this special display mode.
+     *
+     * Since LIGHTWEIGHT_UI has limited space, the position and status
+     * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
+     * length of time to display the status message before clearing.
+     */
+    //#define LIGHTWEIGHT_UI
+    #if ENABLED(LIGHTWEIGHT_UI)
+      #define STATUS_EXPIRE_SECONDS 20
+    #endif
+  #endif
+
 #endif // DOGLCD
 
 // @section safety
diff --git a/Marlin/example_configurations/FolgerTech/i3-2020/Configuration_adv.h b/Marlin/example_configurations/FolgerTech/i3-2020/Configuration_adv.h
index ac884d127..73aecf532 100644
--- a/Marlin/example_configurations/FolgerTech/i3-2020/Configuration_adv.h
+++ b/Marlin/example_configurations/FolgerTech/i3-2020/Configuration_adv.h
@@ -655,6 +655,22 @@
   // Swap the CW/CCW indicators in the graphics overlay
   //#define OVERLAY_GFX_REVERSE
 
+  #if ENABLED(U8GLIB_ST7920)
+    /**
+     * ST7920-based LCDs can emulate a 16 x 4 character display using
+     * the ST7920 character-generator for very fast screen updates.
+     * Enable LIGHTWEIGHT_UI to use this special display mode.
+     *
+     * Since LIGHTWEIGHT_UI has limited space, the position and status
+     * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
+     * length of time to display the status message before clearing.
+     */
+    //#define LIGHTWEIGHT_UI
+    #if ENABLED(LIGHTWEIGHT_UI)
+      #define STATUS_EXPIRE_SECONDS 20
+    #endif
+  #endif
+
 #endif // DOGLCD
 
 // @section safety
diff --git a/Marlin/example_configurations/Infitary/i3-M508/Configuration_adv.h b/Marlin/example_configurations/Infitary/i3-M508/Configuration_adv.h
index 88f558190..5091ed04e 100644
--- a/Marlin/example_configurations/Infitary/i3-M508/Configuration_adv.h
+++ b/Marlin/example_configurations/Infitary/i3-M508/Configuration_adv.h
@@ -656,6 +656,22 @@
   // Swap the CW/CCW indicators in the graphics overlay
   //#define OVERLAY_GFX_REVERSE
 
+  #if ENABLED(U8GLIB_ST7920)
+    /**
+     * ST7920-based LCDs can emulate a 16 x 4 character display using
+     * the ST7920 character-generator for very fast screen updates.
+     * Enable LIGHTWEIGHT_UI to use this special display mode.
+     *
+     * Since LIGHTWEIGHT_UI has limited space, the position and status
+     * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
+     * length of time to display the status message before clearing.
+     */
+    //#define LIGHTWEIGHT_UI
+    #if ENABLED(LIGHTWEIGHT_UI)
+      #define STATUS_EXPIRE_SECONDS 20
+    #endif
+  #endif
+
 #endif // DOGLCD
 
 // @section safety
diff --git a/Marlin/example_configurations/JGAurora/A5/Configuration_adv.h b/Marlin/example_configurations/JGAurora/A5/Configuration_adv.h
index b369615b7..694fda2f2 100644
--- a/Marlin/example_configurations/JGAurora/A5/Configuration_adv.h
+++ b/Marlin/example_configurations/JGAurora/A5/Configuration_adv.h
@@ -656,6 +656,22 @@
   // Swap the CW/CCW indicators in the graphics overlay
   //#define OVERLAY_GFX_REVERSE
 
+  #if ENABLED(U8GLIB_ST7920)
+    /**
+     * ST7920-based LCDs can emulate a 16 x 4 character display using
+     * the ST7920 character-generator for very fast screen updates.
+     * Enable LIGHTWEIGHT_UI to use this special display mode.
+     *
+     * Since LIGHTWEIGHT_UI has limited space, the position and status
+     * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
+     * length of time to display the status message before clearing.
+     */
+    //#define LIGHTWEIGHT_UI
+    #if ENABLED(LIGHTWEIGHT_UI)
+      #define STATUS_EXPIRE_SECONDS 20
+    #endif
+  #endif
+
 #endif // DOGLCD
 
 // @section safety
diff --git a/Marlin/example_configurations/Malyan/M150/Configuration_adv.h b/Marlin/example_configurations/Malyan/M150/Configuration_adv.h
index 78e2795c0..089c109c5 100644
--- a/Marlin/example_configurations/Malyan/M150/Configuration_adv.h
+++ b/Marlin/example_configurations/Malyan/M150/Configuration_adv.h
@@ -656,6 +656,22 @@
   // Swap the CW/CCW indicators in the graphics overlay
   //#define OVERLAY_GFX_REVERSE
 
+  #if ENABLED(U8GLIB_ST7920)
+    /**
+     * ST7920-based LCDs can emulate a 16 x 4 character display using
+     * the ST7920 character-generator for very fast screen updates.
+     * Enable LIGHTWEIGHT_UI to use this special display mode.
+     *
+     * Since LIGHTWEIGHT_UI has limited space, the position and status
+     * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
+     * length of time to display the status message before clearing.
+     */
+    //#define LIGHTWEIGHT_UI
+    #if ENABLED(LIGHTWEIGHT_UI)
+      #define STATUS_EXPIRE_SECONDS 20
+    #endif
+  #endif
+
 #endif // DOGLCD
 
 // @section safety
diff --git a/Marlin/example_configurations/Micromake/C1/enhanced/Configuration_adv.h b/Marlin/example_configurations/Micromake/C1/enhanced/Configuration_adv.h
index 64be9a8e4..ae7ada649 100644
--- a/Marlin/example_configurations/Micromake/C1/enhanced/Configuration_adv.h
+++ b/Marlin/example_configurations/Micromake/C1/enhanced/Configuration_adv.h
@@ -656,6 +656,22 @@
   // Swap the CW/CCW indicators in the graphics overlay
   //#define OVERLAY_GFX_REVERSE
 
+  #if ENABLED(U8GLIB_ST7920)
+    /**
+     * ST7920-based LCDs can emulate a 16 x 4 character display using
+     * the ST7920 character-generator for very fast screen updates.
+     * Enable LIGHTWEIGHT_UI to use this special display mode.
+     *
+     * Since LIGHTWEIGHT_UI has limited space, the position and status
+     * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
+     * length of time to display the status message before clearing.
+     */
+    //#define LIGHTWEIGHT_UI
+    #if ENABLED(LIGHTWEIGHT_UI)
+      #define STATUS_EXPIRE_SECONDS 20
+    #endif
+  #endif
+
 #endif // DOGLCD
 
 // @section safety
diff --git a/Marlin/example_configurations/RigidBot/Configuration_adv.h b/Marlin/example_configurations/RigidBot/Configuration_adv.h
index c4536cce1..ccb4e6f55 100644
--- a/Marlin/example_configurations/RigidBot/Configuration_adv.h
+++ b/Marlin/example_configurations/RigidBot/Configuration_adv.h
@@ -656,6 +656,22 @@
   // Swap the CW/CCW indicators in the graphics overlay
   //#define OVERLAY_GFX_REVERSE
 
+  #if ENABLED(U8GLIB_ST7920)
+    /**
+     * ST7920-based LCDs can emulate a 16 x 4 character display using
+     * the ST7920 character-generator for very fast screen updates.
+     * Enable LIGHTWEIGHT_UI to use this special display mode.
+     *
+     * Since LIGHTWEIGHT_UI has limited space, the position and status
+     * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
+     * length of time to display the status message before clearing.
+     */
+    //#define LIGHTWEIGHT_UI
+    #if ENABLED(LIGHTWEIGHT_UI)
+      #define STATUS_EXPIRE_SECONDS 20
+    #endif
+  #endif
+
 #endif // DOGLCD
 
 // @section safety
diff --git a/Marlin/example_configurations/SCARA/Configuration_adv.h b/Marlin/example_configurations/SCARA/Configuration_adv.h
index 3e2328ca5..ecf105b54 100644
--- a/Marlin/example_configurations/SCARA/Configuration_adv.h
+++ b/Marlin/example_configurations/SCARA/Configuration_adv.h
@@ -656,6 +656,22 @@
   // Swap the CW/CCW indicators in the graphics overlay
   //#define OVERLAY_GFX_REVERSE
 
+  #if ENABLED(U8GLIB_ST7920)
+    /**
+     * ST7920-based LCDs can emulate a 16 x 4 character display using
+     * the ST7920 character-generator for very fast screen updates.
+     * Enable LIGHTWEIGHT_UI to use this special display mode.
+     *
+     * Since LIGHTWEIGHT_UI has limited space, the position and status
+     * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
+     * length of time to display the status message before clearing.
+     */
+    //#define LIGHTWEIGHT_UI
+    #if ENABLED(LIGHTWEIGHT_UI)
+      #define STATUS_EXPIRE_SECONDS 20
+    #endif
+  #endif
+
 #endif // DOGLCD
 
 // @section safety
diff --git a/Marlin/example_configurations/Sanguinololu/Configuration_adv.h b/Marlin/example_configurations/Sanguinololu/Configuration_adv.h
index 6d8590a85..5605213a5 100644
--- a/Marlin/example_configurations/Sanguinololu/Configuration_adv.h
+++ b/Marlin/example_configurations/Sanguinololu/Configuration_adv.h
@@ -656,6 +656,22 @@
   // Swap the CW/CCW indicators in the graphics overlay
   //#define OVERLAY_GFX_REVERSE
 
+  #if ENABLED(U8GLIB_ST7920)
+    /**
+     * ST7920-based LCDs can emulate a 16 x 4 character display using
+     * the ST7920 character-generator for very fast screen updates.
+     * Enable LIGHTWEIGHT_UI to use this special display mode.
+     *
+     * Since LIGHTWEIGHT_UI has limited space, the position and status
+     * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
+     * length of time to display the status message before clearing.
+     */
+    //#define LIGHTWEIGHT_UI
+    #if ENABLED(LIGHTWEIGHT_UI)
+      #define STATUS_EXPIRE_SECONDS 20
+    #endif
+  #endif
+
 #endif // DOGLCD
 
 // @section safety
diff --git a/Marlin/example_configurations/TinyBoy2/Configuration_adv.h b/Marlin/example_configurations/TinyBoy2/Configuration_adv.h
index f2268227d..4066900f1 100644
--- a/Marlin/example_configurations/TinyBoy2/Configuration_adv.h
+++ b/Marlin/example_configurations/TinyBoy2/Configuration_adv.h
@@ -656,6 +656,22 @@
   // Swap the CW/CCW indicators in the graphics overlay
   //#define OVERLAY_GFX_REVERSE
 
+  #if ENABLED(U8GLIB_ST7920)
+    /**
+     * ST7920-based LCDs can emulate a 16 x 4 character display using
+     * the ST7920 character-generator for very fast screen updates.
+     * Enable LIGHTWEIGHT_UI to use this special display mode.
+     *
+     * Since LIGHTWEIGHT_UI has limited space, the position and status
+     * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
+     * length of time to display the status message before clearing.
+     */
+    //#define LIGHTWEIGHT_UI
+    #if ENABLED(LIGHTWEIGHT_UI)
+      #define STATUS_EXPIRE_SECONDS 20
+    #endif
+  #endif
+
 #endif // DOGLCD
 
 // @section safety
diff --git a/Marlin/example_configurations/Velleman/K8200/Configuration_adv.h b/Marlin/example_configurations/Velleman/K8200/Configuration_adv.h
index ea8f035a1..1062bc48e 100644
--- a/Marlin/example_configurations/Velleman/K8200/Configuration_adv.h
+++ b/Marlin/example_configurations/Velleman/K8200/Configuration_adv.h
@@ -669,6 +669,22 @@
   // Swap the CW/CCW indicators in the graphics overlay
   //#define OVERLAY_GFX_REVERSE
 
+  #if ENABLED(U8GLIB_ST7920)
+    /**
+     * ST7920-based LCDs can emulate a 16 x 4 character display using
+     * the ST7920 character-generator for very fast screen updates.
+     * Enable LIGHTWEIGHT_UI to use this special display mode.
+     *
+     * Since LIGHTWEIGHT_UI has limited space, the position and status
+     * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
+     * length of time to display the status message before clearing.
+     */
+    //#define LIGHTWEIGHT_UI
+    #if ENABLED(LIGHTWEIGHT_UI)
+      #define STATUS_EXPIRE_SECONDS 20
+    #endif
+  #endif
+
 #endif // DOGLCD
 
 // @section safety
diff --git a/Marlin/example_configurations/Velleman/K8400/Configuration_adv.h b/Marlin/example_configurations/Velleman/K8400/Configuration_adv.h
index e87dac88a..a7913a30a 100644
--- a/Marlin/example_configurations/Velleman/K8400/Configuration_adv.h
+++ b/Marlin/example_configurations/Velleman/K8400/Configuration_adv.h
@@ -656,6 +656,22 @@
   // Swap the CW/CCW indicators in the graphics overlay
   //#define OVERLAY_GFX_REVERSE
 
+  #if ENABLED(U8GLIB_ST7920)
+    /**
+     * ST7920-based LCDs can emulate a 16 x 4 character display using
+     * the ST7920 character-generator for very fast screen updates.
+     * Enable LIGHTWEIGHT_UI to use this special display mode.
+     *
+     * Since LIGHTWEIGHT_UI has limited space, the position and status
+     * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
+     * length of time to display the status message before clearing.
+     */
+    //#define LIGHTWEIGHT_UI
+    #if ENABLED(LIGHTWEIGHT_UI)
+      #define STATUS_EXPIRE_SECONDS 20
+    #endif
+  #endif
+
 #endif // DOGLCD
 
 // @section safety
diff --git a/Marlin/example_configurations/Wanhao/Duplicator 6/Configuration_adv.h b/Marlin/example_configurations/Wanhao/Duplicator 6/Configuration_adv.h
index b38b802ee..e1e32f8b5 100644
--- a/Marlin/example_configurations/Wanhao/Duplicator 6/Configuration_adv.h	
+++ b/Marlin/example_configurations/Wanhao/Duplicator 6/Configuration_adv.h	
@@ -658,6 +658,22 @@
   // Swap the CW/CCW indicators in the graphics overlay
   //#define OVERLAY_GFX_REVERSE
 
+  #if ENABLED(U8GLIB_ST7920)
+    /**
+     * ST7920-based LCDs can emulate a 16 x 4 character display using
+     * the ST7920 character-generator for very fast screen updates.
+     * Enable LIGHTWEIGHT_UI to use this special display mode.
+     *
+     * Since LIGHTWEIGHT_UI has limited space, the position and status
+     * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
+     * length of time to display the status message before clearing.
+     */
+    //#define LIGHTWEIGHT_UI
+    #if ENABLED(LIGHTWEIGHT_UI)
+      #define STATUS_EXPIRE_SECONDS 20
+    #endif
+  #endif
+
 #endif // DOGLCD
 
 // @section safety
diff --git a/Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration_adv.h b/Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration_adv.h
index 1299ecd99..20eca0efd 100644
--- a/Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration_adv.h
@@ -658,6 +658,22 @@
   // Swap the CW/CCW indicators in the graphics overlay
   //#define OVERLAY_GFX_REVERSE
 
+  #if ENABLED(U8GLIB_ST7920)
+    /**
+     * ST7920-based LCDs can emulate a 16 x 4 character display using
+     * the ST7920 character-generator for very fast screen updates.
+     * Enable LIGHTWEIGHT_UI to use this special display mode.
+     *
+     * Since LIGHTWEIGHT_UI has limited space, the position and status
+     * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
+     * length of time to display the status message before clearing.
+     */
+    //#define LIGHTWEIGHT_UI
+    #if ENABLED(LIGHTWEIGHT_UI)
+      #define STATUS_EXPIRE_SECONDS 20
+    #endif
+  #endif
+
 #endif // DOGLCD
 
 // @section safety
diff --git a/Marlin/example_configurations/delta/FLSUN/kossel/Configuration_adv.h b/Marlin/example_configurations/delta/FLSUN/kossel/Configuration_adv.h
index 0c5647ccd..60b1b9620 100644
--- a/Marlin/example_configurations/delta/FLSUN/kossel/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/FLSUN/kossel/Configuration_adv.h
@@ -658,6 +658,22 @@
   // Swap the CW/CCW indicators in the graphics overlay
   //#define OVERLAY_GFX_REVERSE
 
+  #if ENABLED(U8GLIB_ST7920)
+    /**
+     * ST7920-based LCDs can emulate a 16 x 4 character display using
+     * the ST7920 character-generator for very fast screen updates.
+     * Enable LIGHTWEIGHT_UI to use this special display mode.
+     *
+     * Since LIGHTWEIGHT_UI has limited space, the position and status
+     * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
+     * length of time to display the status message before clearing.
+     */
+    //#define LIGHTWEIGHT_UI
+    #if ENABLED(LIGHTWEIGHT_UI)
+      #define STATUS_EXPIRE_SECONDS 20
+    #endif
+  #endif
+
 #endif // DOGLCD
 
 // @section safety
diff --git a/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration_adv.h b/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration_adv.h
index ef9856cf2..a44d9b21b 100644
--- a/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration_adv.h
@@ -658,6 +658,22 @@
   // Swap the CW/CCW indicators in the graphics overlay
   //#define OVERLAY_GFX_REVERSE
 
+  #if ENABLED(U8GLIB_ST7920)
+    /**
+     * ST7920-based LCDs can emulate a 16 x 4 character display using
+     * the ST7920 character-generator for very fast screen updates.
+     * Enable LIGHTWEIGHT_UI to use this special display mode.
+     *
+     * Since LIGHTWEIGHT_UI has limited space, the position and status
+     * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
+     * length of time to display the status message before clearing.
+     */
+    //#define LIGHTWEIGHT_UI
+    #if ENABLED(LIGHTWEIGHT_UI)
+      #define STATUS_EXPIRE_SECONDS 20
+    #endif
+  #endif
+
 #endif // DOGLCD
 
 // @section safety
diff --git a/Marlin/example_configurations/delta/generic/Configuration_adv.h b/Marlin/example_configurations/delta/generic/Configuration_adv.h
index ef9856cf2..a44d9b21b 100644
--- a/Marlin/example_configurations/delta/generic/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/generic/Configuration_adv.h
@@ -658,6 +658,22 @@
   // Swap the CW/CCW indicators in the graphics overlay
   //#define OVERLAY_GFX_REVERSE
 
+  #if ENABLED(U8GLIB_ST7920)
+    /**
+     * ST7920-based LCDs can emulate a 16 x 4 character display using
+     * the ST7920 character-generator for very fast screen updates.
+     * Enable LIGHTWEIGHT_UI to use this special display mode.
+     *
+     * Since LIGHTWEIGHT_UI has limited space, the position and status
+     * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
+     * length of time to display the status message before clearing.
+     */
+    //#define LIGHTWEIGHT_UI
+    #if ENABLED(LIGHTWEIGHT_UI)
+      #define STATUS_EXPIRE_SECONDS 20
+    #endif
+  #endif
+
 #endif // DOGLCD
 
 // @section safety
diff --git a/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h b/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h
index ef9856cf2..a44d9b21b 100644
--- a/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h
@@ -658,6 +658,22 @@
   // Swap the CW/CCW indicators in the graphics overlay
   //#define OVERLAY_GFX_REVERSE
 
+  #if ENABLED(U8GLIB_ST7920)
+    /**
+     * ST7920-based LCDs can emulate a 16 x 4 character display using
+     * the ST7920 character-generator for very fast screen updates.
+     * Enable LIGHTWEIGHT_UI to use this special display mode.
+     *
+     * Since LIGHTWEIGHT_UI has limited space, the position and status
+     * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
+     * length of time to display the status message before clearing.
+     */
+    //#define LIGHTWEIGHT_UI
+    #if ENABLED(LIGHTWEIGHT_UI)
+      #define STATUS_EXPIRE_SECONDS 20
+    #endif
+  #endif
+
 #endif // DOGLCD
 
 // @section safety
diff --git a/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h b/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h
index 785915d9c..a823a4741 100644
--- a/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h
@@ -663,6 +663,22 @@
   // Swap the CW/CCW indicators in the graphics overlay
   //#define OVERLAY_GFX_REVERSE
 
+  #if ENABLED(U8GLIB_ST7920)
+    /**
+     * ST7920-based LCDs can emulate a 16 x 4 character display using
+     * the ST7920 character-generator for very fast screen updates.
+     * Enable LIGHTWEIGHT_UI to use this special display mode.
+     *
+     * Since LIGHTWEIGHT_UI has limited space, the position and status
+     * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
+     * length of time to display the status message before clearing.
+     */
+    //#define LIGHTWEIGHT_UI
+    #if ENABLED(LIGHTWEIGHT_UI)
+      #define STATUS_EXPIRE_SECONDS 20
+    #endif
+  #endif
+
 #endif // DOGLCD
 
 // @section safety
diff --git a/Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h b/Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h
index 7e0b8495e..3ef06d532 100644
--- a/Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h
@@ -658,6 +658,22 @@
   // Swap the CW/CCW indicators in the graphics overlay
   //#define OVERLAY_GFX_REVERSE
 
+  #if ENABLED(U8GLIB_ST7920)
+    /**
+     * ST7920-based LCDs can emulate a 16 x 4 character display using
+     * the ST7920 character-generator for very fast screen updates.
+     * Enable LIGHTWEIGHT_UI to use this special display mode.
+     *
+     * Since LIGHTWEIGHT_UI has limited space, the position and status
+     * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
+     * length of time to display the status message before clearing.
+     */
+    //#define LIGHTWEIGHT_UI
+    #if ENABLED(LIGHTWEIGHT_UI)
+      #define STATUS_EXPIRE_SECONDS 20
+    #endif
+  #endif
+
 #endif // DOGLCD
 
 // @section safety
diff --git a/Marlin/example_configurations/gCreate/gMax1.5+/Configuration_adv.h b/Marlin/example_configurations/gCreate/gMax1.5+/Configuration_adv.h
index fefbe2462..e9c1848fc 100644
--- a/Marlin/example_configurations/gCreate/gMax1.5+/Configuration_adv.h
+++ b/Marlin/example_configurations/gCreate/gMax1.5+/Configuration_adv.h
@@ -656,6 +656,22 @@
   // Swap the CW/CCW indicators in the graphics overlay
   //#define OVERLAY_GFX_REVERSE
 
+  #if ENABLED(U8GLIB_ST7920)
+    /**
+     * ST7920-based LCDs can emulate a 16 x 4 character display using
+     * the ST7920 character-generator for very fast screen updates.
+     * Enable LIGHTWEIGHT_UI to use this special display mode.
+     *
+     * Since LIGHTWEIGHT_UI has limited space, the position and status
+     * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
+     * length of time to display the status message before clearing.
+     */
+    //#define LIGHTWEIGHT_UI
+    #if ENABLED(LIGHTWEIGHT_UI)
+      #define STATUS_EXPIRE_SECONDS 20
+    #endif
+  #endif
+
 #endif // DOGLCD
 
 // @section safety
diff --git a/Marlin/example_configurations/makibox/Configuration_adv.h b/Marlin/example_configurations/makibox/Configuration_adv.h
index 620a85c2a..65df532bf 100644
--- a/Marlin/example_configurations/makibox/Configuration_adv.h
+++ b/Marlin/example_configurations/makibox/Configuration_adv.h
@@ -656,6 +656,22 @@
   // Swap the CW/CCW indicators in the graphics overlay
   //#define OVERLAY_GFX_REVERSE
 
+  #if ENABLED(U8GLIB_ST7920)
+    /**
+     * ST7920-based LCDs can emulate a 16 x 4 character display using
+     * the ST7920 character-generator for very fast screen updates.
+     * Enable LIGHTWEIGHT_UI to use this special display mode.
+     *
+     * Since LIGHTWEIGHT_UI has limited space, the position and status
+     * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
+     * length of time to display the status message before clearing.
+     */
+    //#define LIGHTWEIGHT_UI
+    #if ENABLED(LIGHTWEIGHT_UI)
+      #define STATUS_EXPIRE_SECONDS 20
+    #endif
+  #endif
+
 #endif // DOGLCD
 
 // @section safety
diff --git a/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h b/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h
index 3f6f0ffac..ab847f2c1 100644
--- a/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h
+++ b/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h
@@ -656,6 +656,22 @@
   // Swap the CW/CCW indicators in the graphics overlay
   //#define OVERLAY_GFX_REVERSE
 
+  #if ENABLED(U8GLIB_ST7920)
+    /**
+     * ST7920-based LCDs can emulate a 16 x 4 character display using
+     * the ST7920 character-generator for very fast screen updates.
+     * Enable LIGHTWEIGHT_UI to use this special display mode.
+     *
+     * Since LIGHTWEIGHT_UI has limited space, the position and status
+     * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
+     * length of time to display the status message before clearing.
+     */
+    //#define LIGHTWEIGHT_UI
+    #if ENABLED(LIGHTWEIGHT_UI)
+      #define STATUS_EXPIRE_SECONDS 20
+    #endif
+  #endif
+
 #endif // DOGLCD
 
 // @section safety
diff --git a/Marlin/example_configurations/wt150/Configuration_adv.h b/Marlin/example_configurations/wt150/Configuration_adv.h
index 02fa07a9c..9f6759a65 100644
--- a/Marlin/example_configurations/wt150/Configuration_adv.h
+++ b/Marlin/example_configurations/wt150/Configuration_adv.h
@@ -657,6 +657,22 @@
   // Swap the CW/CCW indicators in the graphics overlay
   //#define OVERLAY_GFX_REVERSE
 
+  #if ENABLED(U8GLIB_ST7920)
+    /**
+     * ST7920-based LCDs can emulate a 16 x 4 character display using
+     * the ST7920 character-generator for very fast screen updates.
+     * Enable LIGHTWEIGHT_UI to use this special display mode.
+     *
+     * Since LIGHTWEIGHT_UI has limited space, the position and status
+     * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
+     * length of time to display the status message before clearing.
+     */
+    //#define LIGHTWEIGHT_UI
+    #if ENABLED(LIGHTWEIGHT_UI)
+      #define STATUS_EXPIRE_SECONDS 20
+    #endif
+  #endif
+
 #endif // DOGLCD
 
 // @section safety