Extra options for LEVEL_BED_CORNERS (#10484)

Marlin/example_configurations/AlephObjects/TAZ4/Configuration.h

@@ -1063,6 +1063,11 @@
 // Add a menu item to move between bed corners for manual bed adjustment
 //#define LEVEL_BED_CORNERS
 
+#if ENABLED(LEVEL_BED_CORNERS)
+  #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
+#endif
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.

Marlin/example_configurations/AliExpress/CL-260/Configuration.h

@@ -1043,6 +1043,11 @@
 // Add a menu item to move between bed corners for manual bed adjustment
 //#define LEVEL_BED_CORNERS
 
+#if ENABLED(LEVEL_BED_CORNERS)
+  #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
+#endif
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.

Marlin/example_configurations/Anet/A6/Configuration.h

@@ -1181,6 +1181,11 @@
 // Add a menu item to move between bed corners for manual bed adjustment
 //#define LEVEL_BED_CORNERS
 
+#if ENABLED(LEVEL_BED_CORNERS)
+  #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
+#endif
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.

Marlin/example_configurations/Anet/A8/Configuration.h

@@ -1061,6 +1061,11 @@
 // Add a menu item to move between bed corners for manual bed adjustment
 //#define LEVEL_BED_CORNERS
 
+#if ENABLED(LEVEL_BED_CORNERS)
+  #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
+#endif
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.

Marlin/example_configurations/BIBO/TouchX/Cyclops/Configuration.h

@@ -1043,6 +1043,11 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
 // Add a menu item to move between bed corners for manual bed adjustment
 #define LEVEL_BED_CORNERS
 
+#if ENABLED(LEVEL_BED_CORNERS)
+  #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
+#endif
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.

Marlin/example_configurations/BIBO/TouchX/default/Configuration.h

@@ -1043,6 +1043,11 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
 // Add a menu item to move between bed corners for manual bed adjustment
 #define LEVEL_BED_CORNERS
 
+#if ENABLED(LEVEL_BED_CORNERS)
+  #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
+#endif
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.

Marlin/example_configurations/BQ/Hephestos/Configuration.h

@@ -1031,6 +1031,11 @@
 // Add a menu item to move between bed corners for manual bed adjustment
 //#define LEVEL_BED_CORNERS
 
+#if ENABLED(LEVEL_BED_CORNERS)
+  #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
+#endif
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.

Marlin/example_configurations/BQ/Hephestos_2/Configuration.h

@@ -1055,6 +1055,11 @@
 // Add a menu item to move between bed corners for manual bed adjustment
 //#define LEVEL_BED_CORNERS
 
+#if ENABLED(LEVEL_BED_CORNERS)
+  #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
+#endif
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.

Marlin/example_configurations/BQ/WITBOX/Configuration.h

@@ -1031,6 +1031,11 @@
 // Add a menu item to move between bed corners for manual bed adjustment
 //#define LEVEL_BED_CORNERS
 
+#if ENABLED(LEVEL_BED_CORNERS)
+  #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
+#endif
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.

Marlin/example_configurations/Cartesio/Configuration.h

@@ -1042,6 +1042,11 @@
 // Add a menu item to move between bed corners for manual bed adjustment
 //#define LEVEL_BED_CORNERS
 
+#if ENABLED(LEVEL_BED_CORNERS)
+  #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
+#endif
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.

Marlin/example_configurations/Creality/CR-10/Configuration.h

@@ -1053,6 +1053,11 @@
 // Add a menu item to move between bed corners for manual bed adjustment
 #define LEVEL_BED_CORNERS
 
+#if ENABLED(LEVEL_BED_CORNERS)
+  #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
+#endif
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.

Marlin/example_configurations/Creality/CR-10S/Configuration.h

@@ -1044,6 +1044,11 @@
 // Add a menu item to move between bed corners for manual bed adjustment
 #define LEVEL_BED_CORNERS
 
+#if ENABLED(LEVEL_BED_CORNERS)
+  #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
+#endif
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.

Marlin/example_configurations/Creality/CR-10mini/Configuration.h

@@ -1062,6 +1062,11 @@
 // Add a menu item to move between bed corners for manual bed adjustment
 //#define LEVEL_BED_CORNERS
 
+#if ENABLED(LEVEL_BED_CORNERS)
+  #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
+#endif
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.

Marlin/example_configurations/Creality/CR-8/Configuration.h

@@ -1049,6 +1049,11 @@
 // Add a menu item to move between bed corners for manual bed adjustment
 //#define LEVEL_BED_CORNERS
 
+#if ENABLED(LEVEL_BED_CORNERS)
+  #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
+#endif
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.

Marlin/example_configurations/Creality/Ender-2/Configuration.h

@@ -1047,6 +1047,11 @@
 // Add a menu item to move between bed corners for manual bed adjustment
 //#define LEVEL_BED_CORNERS
 
+#if ENABLED(LEVEL_BED_CORNERS)
+  #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
+#endif
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.

Marlin/example_configurations/Creality/Ender-4/Configuration.h

@@ -1053,6 +1053,11 @@
 // Add a menu item to move between bed corners for manual bed adjustment
 //#define LEVEL_BED_CORNERS
 
+#if ENABLED(LEVEL_BED_CORNERS)
+  #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
+#endif
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.

Marlin/example_configurations/Felix/Configuration.h

@@ -1025,6 +1025,11 @@
 // Add a menu item to move between bed corners for manual bed adjustment
 //#define LEVEL_BED_CORNERS
 
+#if ENABLED(LEVEL_BED_CORNERS)
+  #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
+#endif
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.

Marlin/example_configurations/Felix/DUAL/Configuration.h

@@ -1025,6 +1025,11 @@
 // Add a menu item to move between bed corners for manual bed adjustment
 //#define LEVEL_BED_CORNERS
 
+#if ENABLED(LEVEL_BED_CORNERS)
+  #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
+#endif
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.

Marlin/example_configurations/FolgerTech/i3-2020/Configuration.h

@@ -1067,6 +1067,11 @@
 // Add a menu item to move between bed corners for manual bed adjustment
 //#define LEVEL_BED_CORNERS
 
+#if ENABLED(LEVEL_BED_CORNERS)
+  #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
+#endif
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.

Marlin/example_configurations/Geeetech/GT2560/Configuration.h

@@ -1058,6 +1058,11 @@
 // Add a menu item to move between bed corners for manual bed adjustment
 //#define LEVEL_BED_CORNERS
 
+#if ENABLED(LEVEL_BED_CORNERS)
+  #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
+#endif
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.

Marlin/example_configurations/Geeetech/I3_Pro_X-GT2560/Configuration.h

@@ -1043,6 +1043,11 @@
 // Add a menu item to move between bed corners for manual bed adjustment
 //#define LEVEL_BED_CORNERS
 
+#if ENABLED(LEVEL_BED_CORNERS)
+  #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
+#endif
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.

Marlin/example_configurations/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h

@@ -1059,6 +1059,11 @@
 // Add a menu item to move between bed corners for manual bed adjustment
 #define LEVEL_BED_CORNERS
 
+#if ENABLED(LEVEL_BED_CORNERS)
+  #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
+#endif
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.

Marlin/example_configurations/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h

@@ -1058,6 +1058,11 @@
 // Add a menu item to move between bed corners for manual bed adjustment
 #define LEVEL_BED_CORNERS
 
+#if ENABLED(LEVEL_BED_CORNERS)
+  #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
+#endif
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.

Marlin/example_configurations/Infitary/i3-M508/Configuration.h

@@ -1047,6 +1047,11 @@
 // Add a menu item to move between bed corners for manual bed adjustment
 //#define LEVEL_BED_CORNERS
 
+#if ENABLED(LEVEL_BED_CORNERS)
+  #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
+#endif
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.

Marlin/example_configurations/JGAurora/A5/Configuration.h

@@ -1054,6 +1054,11 @@
 // Add a menu item to move between bed corners for manual bed adjustment
 #define LEVEL_BED_CORNERS
 
+#if ENABLED(LEVEL_BED_CORNERS)
+  #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
+#endif
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.

Marlin/example_configurations/Malyan/M150/Configuration.h

@@ -1082,6 +1082,11 @@
 // Add a menu item to move between bed corners for manual bed adjustment
 //#define LEVEL_BED_CORNERS
 
+#if ENABLED(LEVEL_BED_CORNERS)
+  #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
+#endif
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.

Marlin/example_configurations/Micromake/C1/basic/Configuration.h

@@ -1047,6 +1047,11 @@
 // Add a menu item to move between bed corners for manual bed adjustment
 //#define LEVEL_BED_CORNERS
 
+#if ENABLED(LEVEL_BED_CORNERS)
+  #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
+#endif
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.

Marlin/example_configurations/Micromake/C1/enhanced/Configuration.h

@@ -1047,6 +1047,11 @@
 // Add a menu item to move between bed corners for manual bed adjustment
 //#define LEVEL_BED_CORNERS
 
+#if ENABLED(LEVEL_BED_CORNERS)
+  #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
+#endif
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.

Marlin/example_configurations/RepRapPro/Huxley/Configuration.h

@@ -1089,6 +1089,11 @@ Black rubber belt(MXL), 18 - tooth aluminium pulley : 87.489 step per mm (Huxley
 // Add a menu item to move between bed corners for manual bed adjustment
 //#define LEVEL_BED_CORNERS
 
+#if ENABLED(LEVEL_BED_CORNERS)
+  #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
+#endif
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.

Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h

@@ -1043,6 +1043,11 @@
 // Add a menu item to move between bed corners for manual bed adjustment
 //#define LEVEL_BED_CORNERS
 
+#if ENABLED(LEVEL_BED_CORNERS)
+  #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
+#endif
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.

Marlin/example_configurations/RigidBot/Configuration.h

@@ -1041,6 +1041,11 @@
 // Add a menu item to move between bed corners for manual bed adjustment
 //#define LEVEL_BED_CORNERS
 
+#if ENABLED(LEVEL_BED_CORNERS)
+  #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
+#endif
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.

Marlin/example_configurations/SCARA/Configuration.h

@@ -1055,6 +1055,11 @@
 // Add a menu item to move between bed corners for manual bed adjustment
 //#define LEVEL_BED_CORNERS
 
+#if ENABLED(LEVEL_BED_CORNERS)
+  #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
+#endif
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.

Marlin/example_configurations/Sanguinololu/Configuration.h

@@ -1074,6 +1074,11 @@
 // Add a menu item to move between bed corners for manual bed adjustment
 //#define LEVEL_BED_CORNERS
 
+#if ENABLED(LEVEL_BED_CORNERS)
+  #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
+#endif
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.

Marlin/example_configurations/TinyBoy2/Configuration.h

@@ -1099,6 +1099,11 @@
 // Add a menu item to move between bed corners for manual bed adjustment
 //#define LEVEL_BED_CORNERS
 
+#if ENABLED(LEVEL_BED_CORNERS)
+  #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
+#endif
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.

Marlin/example_configurations/Tronxy/X1/Configuration.h

@@ -1043,6 +1043,11 @@
 // Add a menu item to move between bed corners for manual bed adjustment
 #define LEVEL_BED_CORNERS
 
+#if ENABLED(LEVEL_BED_CORNERS)
+  #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
+#endif
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.

Marlin/example_configurations/Tronxy/X5S/Configuration.h

@@ -1043,6 +1043,11 @@
 // Add a menu item to move between bed corners for manual bed adjustment
 #define LEVEL_BED_CORNERS
 
+#if ENABLED(LEVEL_BED_CORNERS)
+  #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
+#endif
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.

Marlin/example_configurations/Tronxy/XY100/Configuration.h

@@ -1054,6 +1054,11 @@
 // Add a menu item to move between bed corners for manual bed adjustment
 //#define LEVEL_BED_CORNERS
 
+#if ENABLED(LEVEL_BED_CORNERS)
+  #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
+#endif
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.

Marlin/example_configurations/Velleman/K8200/Configuration.h

@@ -1073,6 +1073,11 @@
 // Add a menu item to move between bed corners for manual bed adjustment
 //#define LEVEL_BED_CORNERS
 
+#if ENABLED(LEVEL_BED_CORNERS)
+  #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
+#endif
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.

Marlin/example_configurations/Velleman/K8400/Configuration.h

@@ -1043,6 +1043,11 @@
 // Add a menu item to move between bed corners for manual bed adjustment
 //#define LEVEL_BED_CORNERS
 
+#if ENABLED(LEVEL_BED_CORNERS)
+  #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
+#endif
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.

Marlin/example_configurations/Velleman/K8400/Dual-head/Configuration.h

@@ -1043,6 +1043,11 @@
 // Add a menu item to move between bed corners for manual bed adjustment
 //#define LEVEL_BED_CORNERS
 
+#if ENABLED(LEVEL_BED_CORNERS)
+  #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
+#endif
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.

Marlin/example_configurations/Wanhao/Duplicator 6/Configuration.h

@@ -1050,6 +1050,11 @@
 // Add a menu item to move between bed corners for manual bed adjustment
 //#define LEVEL_BED_CORNERS
 
+#if ENABLED(LEVEL_BED_CORNERS)
+  #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
+#endif
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.

Marlin/example_configurations/adafruit/ST7565/Configuration.h

@@ -1043,6 +1043,11 @@
 // Add a menu item to move between bed corners for manual bed adjustment
 //#define LEVEL_BED_CORNERS
 
+#if ENABLED(LEVEL_BED_CORNERS)
+  #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
+#endif
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.

Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration.h

@@ -1194,6 +1194,11 @@
 // Add a menu item to move between bed corners for manual bed adjustment
 //#define LEVEL_BED_CORNERS
 
+#if ENABLED(LEVEL_BED_CORNERS)
+  #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
+#endif
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.

Marlin/example_configurations/delta/FLSUN/kossel/Configuration.h

@@ -1176,6 +1176,11 @@
 // Add a menu item to move between bed corners for manual bed adjustment
 //#define LEVEL_BED_CORNERS
 
+#if ENABLED(LEVEL_BED_CORNERS)
+  #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
+#endif
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.

Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration.h

@@ -1175,6 +1175,11 @@
 // Add a menu item to move between bed corners for manual bed adjustment
 //#define LEVEL_BED_CORNERS
 
+#if ENABLED(LEVEL_BED_CORNERS)
+  #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
+#endif
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.

Marlin/example_configurations/delta/Hatchbox_Alpha/Configuration.h

@@ -1189,6 +1189,11 @@
 // Add a menu item to move between bed corners for manual bed adjustment
 //#define LEVEL_BED_CORNERS
 
+#if ENABLED(LEVEL_BED_CORNERS)
+  #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
+#endif
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.

Marlin/example_configurations/delta/generic/Configuration.h

@@ -1163,6 +1163,11 @@
 // Add a menu item to move between bed corners for manual bed adjustment
 //#define LEVEL_BED_CORNERS
 
+#if ENABLED(LEVEL_BED_CORNERS)
+  #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
+#endif
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.

Marlin/example_configurations/delta/kossel_mini/Configuration.h

@@ -1166,6 +1166,11 @@
 // Add a menu item to move between bed corners for manual bed adjustment
 //#define LEVEL_BED_CORNERS
 
+#if ENABLED(LEVEL_BED_CORNERS)
+  #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
+#endif
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.

Marlin/example_configurations/delta/kossel_pro/Configuration.h

@@ -1157,6 +1157,11 @@
 // Add a menu item to move between bed corners for manual bed adjustment
 //#define LEVEL_BED_CORNERS
 
+#if ENABLED(LEVEL_BED_CORNERS)
+  #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
+#endif
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.

Marlin/example_configurations/delta/kossel_xl/Configuration.h

@@ -1166,6 +1166,11 @@
 // Add a menu item to move between bed corners for manual bed adjustment
 //#define LEVEL_BED_CORNERS
 
+#if ENABLED(LEVEL_BED_CORNERS)
+  #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
+#endif
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.

Marlin/example_configurations/gCreate/gMax1.5+/Configuration.h

@@ -1064,6 +1064,11 @@
 // Add a menu item to move between bed corners for manual bed adjustment
 //#define LEVEL_BED_CORNERS
 
+#if ENABLED(LEVEL_BED_CORNERS)
+  #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
+#endif
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.

Marlin/example_configurations/makibox/Configuration.h

@@ -1046,6 +1046,11 @@
 // Add a menu item to move between bed corners for manual bed adjustment
 //#define LEVEL_BED_CORNERS
 
+#if ENABLED(LEVEL_BED_CORNERS)
+  #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
+#endif
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.

Marlin/example_configurations/tvrrug/Round2/Configuration.h

@@ -1038,6 +1038,11 @@
 // Add a menu item to move between bed corners for manual bed adjustment
 //#define LEVEL_BED_CORNERS
 
+#if ENABLED(LEVEL_BED_CORNERS)
+  #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
+#endif
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.

Marlin/example_configurations/wt150/Configuration.h

@@ -1048,6 +1048,11 @@
 // Add a menu item to move between bed corners for manual bed adjustment
 //#define LEVEL_BED_CORNERS
 
+#if ENABLED(LEVEL_BED_CORNERS)
+  #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
+#endif
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.