felix/Marlin
1
0 Fork 0
Code Issues Pull Requests Releases Wiki Activity

Merge pull request #9538 from shaktee/bibo-cyclops-1.1x

Browse Source 
[1.1.x] BIBO Cyclops
This commit is contained in:
Scott Lahteine authored and GitHub committed 2018-02-08 21:00:59 -06:00
2 parents 03f27a5e41 3e838bf6b6
commit 169515404d
3 files changed
+1805 -7
Download Patch File Download Diff File Expand all files Collapse all files

No files matched your search

Marlin/example_configurations/BIBO/TouchX/Configuration_adv.h
+4 -4
View File
@@ -64,8 +64,8 @@
* THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD
*/
#if ENABLED(THERMAL_PROTECTION_HOTENDS)
#define THERMAL_PROTECTION_PERIOD 60 // Seconds
#define THERMAL_PROTECTION_HYSTERESIS 2 // Degrees Celsius
#define THERMAL_PROTECTION_PERIOD 40 // Seconds
#define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius
/**
* Whenever an M104, M109, or M303 increases the target temperature, the
@@ -79,7 +79,7 @@
* and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set
* below 2.
*/
#define WATCH_TEMP_PERIOD 45 // Seconds
#define WATCH_TEMP_PERIOD 20 // Seconds
#define WATCH_TEMP_INCREASE 2 // Degrees Celsius
#endif
@@ -87,7 +87,7 @@
* Thermal Protection parameters for the bed are just as above for hotends.
*/
#if ENABLED(THERMAL_PROTECTION_BED)
#define THERMAL_PROTECTION_BED_PERIOD 40 // Seconds
#define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds
#define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius
/**
Marlin/example_configurations/BIBO/TouchX/Cyclops/Configuration.h
+1798
View File
File diff suppressed because it is too large. Load diff
Marlin/example_configurations/BIBO/TouchX/Configuration.h → Marlin/example_configurations/BIBO/TouchX/default/Configuration.h
+3 -3
View File
@@ -568,9 +568,9 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
* M204 R Retract Acceleration
* M204 T Travel Acceleration
*/
#define DEFAULT_ACCELERATION 1100 // X, Y, Z and E acceleration in mm/s^2 for printing moves
#define DEFAULT_RETRACT_ACCELERATION 1100 // E acceleration in mm/s^2 for retracts
#define DEFAULT_TRAVEL_ACCELERATION 1100 // X, Y, Z acceleration in mm/s^2 for travel (non printing) moves
#define DEFAULT_ACCELERATION 1100 // X, Y, Z and E acceleration for printing moves
#define DEFAULT_RETRACT_ACCELERATION 1100 // E acceleration for retracts
#define DEFAULT_TRAVEL_ACCELERATION 1100 // X, Y, Z acceleration for travel (non printing) moves
/**
* Default Jerk (mm/s)