diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h
index 17fa87171..1396662e6 100644
--- a/Marlin/Configuration.h
+++ b/Marlin/Configuration.h
@@ -846,6 +846,10 @@
   #define MAX_SOFTWARE_ENDSTOP_Z
 #endif
 
+#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
+  //#define SOFT_ENDSTOPS_MENU_ITEM  // Enable/Disable software endstops from the LCD
+#endif
+
 /**
  * Filament Runout Sensors
  * Mechanical or opto endstops are used to check for the presence of filament.
diff --git a/Marlin/example_configurations/AlephObjects/TAZ4/Configuration.h b/Marlin/example_configurations/AlephObjects/TAZ4/Configuration.h
index 5221f867f..a9ed733b2 100644
--- a/Marlin/example_configurations/AlephObjects/TAZ4/Configuration.h
+++ b/Marlin/example_configurations/AlephObjects/TAZ4/Configuration.h
@@ -866,6 +866,10 @@
   #define MAX_SOFTWARE_ENDSTOP_Z
 #endif
 
+#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
+  //#define SOFT_ENDSTOPS_MENU_ITEM  // Enable/Disable software endstops from the LCD
+#endif
+
 /**
  * Filament Runout Sensors
  * Mechanical or opto endstops are used to check for the presence of filament.
diff --git a/Marlin/example_configurations/AliExpress/CL-260/Configuration.h b/Marlin/example_configurations/AliExpress/CL-260/Configuration.h
index 4a84f565d..086638ed5 100644
--- a/Marlin/example_configurations/AliExpress/CL-260/Configuration.h
+++ b/Marlin/example_configurations/AliExpress/CL-260/Configuration.h
@@ -846,6 +846,10 @@
   #define MAX_SOFTWARE_ENDSTOP_Z
 #endif
 
+#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
+  //#define SOFT_ENDSTOPS_MENU_ITEM  // Enable/Disable software endstops from the LCD
+#endif
+
 /**
  * Filament Runout Sensors
  * Mechanical or opto endstops are used to check for the presence of filament.
diff --git a/Marlin/example_configurations/Anet/A6/Configuration.h b/Marlin/example_configurations/Anet/A6/Configuration.h
index 191276db8..6a68b7b99 100644
--- a/Marlin/example_configurations/Anet/A6/Configuration.h
+++ b/Marlin/example_configurations/Anet/A6/Configuration.h
@@ -960,6 +960,10 @@
   #define MAX_SOFTWARE_ENDSTOP_Z
 #endif
 
+#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
+  //#define SOFT_ENDSTOPS_MENU_ITEM  // Enable/Disable software endstops from the LCD
+#endif
+
 /**
  * Filament Runout Sensors
  * Mechanical or opto endstops are used to check for the presence of filament.
diff --git a/Marlin/example_configurations/Anet/A8/Configuration.h b/Marlin/example_configurations/Anet/A8/Configuration.h
index 1a4867f04..e8af90fed 100644
--- a/Marlin/example_configurations/Anet/A8/Configuration.h
+++ b/Marlin/example_configurations/Anet/A8/Configuration.h
@@ -853,6 +853,10 @@
   #define MAX_SOFTWARE_ENDSTOP_Z
 #endif
 
+#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
+  //#define SOFT_ENDSTOPS_MENU_ITEM  // Enable/Disable software endstops from the LCD
+#endif
+
 /**
  * Filament Runout Sensors
  * Mechanical or opto endstops are used to check for the presence of filament.
diff --git a/Marlin/example_configurations/BIBO/TouchX/Cyclops/Configuration.h b/Marlin/example_configurations/BIBO/TouchX/Cyclops/Configuration.h
index 0d50d8de3..eda1cece3 100644
--- a/Marlin/example_configurations/BIBO/TouchX/Cyclops/Configuration.h
+++ b/Marlin/example_configurations/BIBO/TouchX/Cyclops/Configuration.h
@@ -846,6 +846,10 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
   #define MAX_SOFTWARE_ENDSTOP_Z
 #endif
 
+#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
+  //#define SOFT_ENDSTOPS_MENU_ITEM  // Enable/Disable software endstops from the LCD
+#endif
+
 /**
  * Filament Runout Sensors
  * Mechanical or opto endstops are used to check for the presence of filament.
diff --git a/Marlin/example_configurations/BIBO/TouchX/default/Configuration.h b/Marlin/example_configurations/BIBO/TouchX/default/Configuration.h
index 9d77ddc99..7a6d49624 100644
--- a/Marlin/example_configurations/BIBO/TouchX/default/Configuration.h
+++ b/Marlin/example_configurations/BIBO/TouchX/default/Configuration.h
@@ -846,6 +846,10 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
   #define MAX_SOFTWARE_ENDSTOP_Z
 #endif
 
+#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
+  //#define SOFT_ENDSTOPS_MENU_ITEM  // Enable/Disable software endstops from the LCD
+#endif
+
 /**
  * Filament Runout Sensors
  * Mechanical or opto endstops are used to check for the presence of filament.
diff --git a/Marlin/example_configurations/BQ/Hephestos/Configuration.h b/Marlin/example_configurations/BQ/Hephestos/Configuration.h
index 530da0c0d..81c5ae950 100644
--- a/Marlin/example_configurations/BQ/Hephestos/Configuration.h
+++ b/Marlin/example_configurations/BQ/Hephestos/Configuration.h
@@ -834,6 +834,10 @@
   #define MAX_SOFTWARE_ENDSTOP_Z
 #endif
 
+#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
+  //#define SOFT_ENDSTOPS_MENU_ITEM  // Enable/Disable software endstops from the LCD
+#endif
+
 /**
  * Filament Runout Sensors
  * Mechanical or opto endstops are used to check for the presence of filament.
diff --git a/Marlin/example_configurations/BQ/Hephestos_2/Configuration.h b/Marlin/example_configurations/BQ/Hephestos_2/Configuration.h
index d4f4a24ef..a804263f1 100644
--- a/Marlin/example_configurations/BQ/Hephestos_2/Configuration.h
+++ b/Marlin/example_configurations/BQ/Hephestos_2/Configuration.h
@@ -847,6 +847,10 @@
   #define MAX_SOFTWARE_ENDSTOP_Z
 #endif
 
+#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
+  //#define SOFT_ENDSTOPS_MENU_ITEM  // Enable/Disable software endstops from the LCD
+#endif
+
 /**
  * Filament Runout Sensors
  * Mechanical or opto endstops are used to check for the presence of filament.
diff --git a/Marlin/example_configurations/BQ/WITBOX/Configuration.h b/Marlin/example_configurations/BQ/WITBOX/Configuration.h
index 9a5dd4a11..3bef690c0 100644
--- a/Marlin/example_configurations/BQ/WITBOX/Configuration.h
+++ b/Marlin/example_configurations/BQ/WITBOX/Configuration.h
@@ -834,6 +834,10 @@
   #define MAX_SOFTWARE_ENDSTOP_Z
 #endif
 
+#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
+  //#define SOFT_ENDSTOPS_MENU_ITEM  // Enable/Disable software endstops from the LCD
+#endif
+
 /**
  * Filament Runout Sensors
  * Mechanical or opto endstops are used to check for the presence of filament.
diff --git a/Marlin/example_configurations/Cartesio/Configuration.h b/Marlin/example_configurations/Cartesio/Configuration.h
index 7ef89a5d5..4f843f2ce 100644
--- a/Marlin/example_configurations/Cartesio/Configuration.h
+++ b/Marlin/example_configurations/Cartesio/Configuration.h
@@ -845,6 +845,10 @@
   #define MAX_SOFTWARE_ENDSTOP_Z
 #endif
 
+#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
+  //#define SOFT_ENDSTOPS_MENU_ITEM  // Enable/Disable software endstops from the LCD
+#endif
+
 /**
  * Filament Runout Sensors
  * Mechanical or opto endstops are used to check for the presence of filament.
diff --git a/Marlin/example_configurations/Creality/CR-10/Configuration.h b/Marlin/example_configurations/Creality/CR-10/Configuration.h
index da1afeb23..944af2d6a 100755
--- a/Marlin/example_configurations/Creality/CR-10/Configuration.h
+++ b/Marlin/example_configurations/Creality/CR-10/Configuration.h
@@ -856,6 +856,10 @@
   #define MAX_SOFTWARE_ENDSTOP_Z
 #endif
 
+#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
+  //#define SOFT_ENDSTOPS_MENU_ITEM  // Enable/Disable software endstops from the LCD
+#endif
+
 /**
  * Filament Runout Sensors
  * Mechanical or opto endstops are used to check for the presence of filament.
diff --git a/Marlin/example_configurations/Creality/CR-10S/Configuration.h b/Marlin/example_configurations/Creality/CR-10S/Configuration.h
index 50ed8c026..5b58e1034 100644
--- a/Marlin/example_configurations/Creality/CR-10S/Configuration.h
+++ b/Marlin/example_configurations/Creality/CR-10S/Configuration.h
@@ -846,6 +846,10 @@
   #define MAX_SOFTWARE_ENDSTOP_Z
 #endif
 
+#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
+  //#define SOFT_ENDSTOPS_MENU_ITEM  // Enable/Disable software endstops from the LCD
+#endif
+
 /**
  * Filament Runout Sensors
  * Mechanical or opto endstops are used to check for the presence of filament.
diff --git a/Marlin/example_configurations/Creality/CR-10mini/Configuration.h b/Marlin/example_configurations/Creality/CR-10mini/Configuration.h
index c27ddefdf..16ef96b49 100644
--- a/Marlin/example_configurations/Creality/CR-10mini/Configuration.h
+++ b/Marlin/example_configurations/Creality/CR-10mini/Configuration.h
@@ -865,6 +865,10 @@
   #define MAX_SOFTWARE_ENDSTOP_Z
 #endif
 
+#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
+  //#define SOFT_ENDSTOPS_MENU_ITEM  // Enable/Disable software endstops from the LCD
+#endif
+
 /**
  * Filament Runout Sensors
  * Mechanical or opto endstops are used to check for the presence of filament.
diff --git a/Marlin/example_configurations/Creality/CR-8/Configuration.h b/Marlin/example_configurations/Creality/CR-8/Configuration.h
index 86fd9ccf9..0d2dbf336 100644
--- a/Marlin/example_configurations/Creality/CR-8/Configuration.h
+++ b/Marlin/example_configurations/Creality/CR-8/Configuration.h
@@ -855,6 +855,10 @@
   #define MAX_SOFTWARE_ENDSTOP_Z
 #endif
 
+#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
+  //#define SOFT_ENDSTOPS_MENU_ITEM  // Enable/Disable software endstops from the LCD
+#endif
+
 /**
  * Filament Runout Sensors
  * Mechanical or opto endstops are used to check for the presence of filament.
diff --git a/Marlin/example_configurations/Creality/Ender-2/Configuration.h b/Marlin/example_configurations/Creality/Ender-2/Configuration.h
index 23b0835df..6a3acbaea 100644
--- a/Marlin/example_configurations/Creality/Ender-2/Configuration.h
+++ b/Marlin/example_configurations/Creality/Ender-2/Configuration.h
@@ -850,6 +850,10 @@
   #define MAX_SOFTWARE_ENDSTOP_Z
 #endif
 
+#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
+  //#define SOFT_ENDSTOPS_MENU_ITEM  // Enable/Disable software endstops from the LCD
+#endif
+
 /**
  * Filament Runout Sensors
  * Mechanical or opto endstops are used to check for the presence of filament.
diff --git a/Marlin/example_configurations/Creality/Ender-4/Configuration.h b/Marlin/example_configurations/Creality/Ender-4/Configuration.h
index 8c2426ced..4e6b598bf 100644
--- a/Marlin/example_configurations/Creality/Ender-4/Configuration.h
+++ b/Marlin/example_configurations/Creality/Ender-4/Configuration.h
@@ -856,6 +856,10 @@
   #define MAX_SOFTWARE_ENDSTOP_Z
 #endif
 
+#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
+  //#define SOFT_ENDSTOPS_MENU_ITEM  // Enable/Disable software endstops from the LCD
+#endif
+
 /**
  * Filament Runout Sensors
  * Mechanical or opto endstops are used to check for the presence of filament.
diff --git a/Marlin/example_configurations/Felix/Configuration.h b/Marlin/example_configurations/Felix/Configuration.h
index ec3748a0a..a5a080969 100644
--- a/Marlin/example_configurations/Felix/Configuration.h
+++ b/Marlin/example_configurations/Felix/Configuration.h
@@ -828,6 +828,10 @@
   #define MAX_SOFTWARE_ENDSTOP_Z
 #endif
 
+#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
+  //#define SOFT_ENDSTOPS_MENU_ITEM  // Enable/Disable software endstops from the LCD
+#endif
+
 /**
  * Filament Runout Sensors
  * Mechanical or opto endstops are used to check for the presence of filament.
diff --git a/Marlin/example_configurations/Felix/DUAL/Configuration.h b/Marlin/example_configurations/Felix/DUAL/Configuration.h
index f2ac3e960..3cdac71fd 100644
--- a/Marlin/example_configurations/Felix/DUAL/Configuration.h
+++ b/Marlin/example_configurations/Felix/DUAL/Configuration.h
@@ -828,6 +828,10 @@
   #define MAX_SOFTWARE_ENDSTOP_Z
 #endif
 
+#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
+  //#define SOFT_ENDSTOPS_MENU_ITEM  // Enable/Disable software endstops from the LCD
+#endif
+
 /**
  * Filament Runout Sensors
  * Mechanical or opto endstops are used to check for the presence of filament.
diff --git a/Marlin/example_configurations/FolgerTech/i3-2020/Configuration.h b/Marlin/example_configurations/FolgerTech/i3-2020/Configuration.h
index 15bcd60db..efba48ce3 100644
--- a/Marlin/example_configurations/FolgerTech/i3-2020/Configuration.h
+++ b/Marlin/example_configurations/FolgerTech/i3-2020/Configuration.h
@@ -852,6 +852,10 @@
   #define MAX_SOFTWARE_ENDSTOP_Z
 #endif
 
+#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
+  //#define SOFT_ENDSTOPS_MENU_ITEM  // Enable/Disable software endstops from the LCD
+#endif
+
 /**
  * Filament Runout Sensors
  * Mechanical or opto endstops are used to check for the presence of filament.
diff --git a/Marlin/example_configurations/Geeetech/GT2560/Configuration.h b/Marlin/example_configurations/Geeetech/GT2560/Configuration.h
index 6329fb759..8beeac71e 100644
--- a/Marlin/example_configurations/Geeetech/GT2560/Configuration.h
+++ b/Marlin/example_configurations/Geeetech/GT2560/Configuration.h
@@ -861,6 +861,10 @@
   #define MAX_SOFTWARE_ENDSTOP_Z
 #endif
 
+#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
+  //#define SOFT_ENDSTOPS_MENU_ITEM  // Enable/Disable software endstops from the LCD
+#endif
+
 /**
  * Filament Runout Sensors
  * Mechanical or opto endstops are used to check for the presence of filament.
diff --git a/Marlin/example_configurations/Geeetech/I3_Pro_X-GT2560/Configuration.h b/Marlin/example_configurations/Geeetech/I3_Pro_X-GT2560/Configuration.h
index 9f97e03ae..fe9b69cb7 100644
--- a/Marlin/example_configurations/Geeetech/I3_Pro_X-GT2560/Configuration.h
+++ b/Marlin/example_configurations/Geeetech/I3_Pro_X-GT2560/Configuration.h
@@ -846,6 +846,10 @@
   #define MAX_SOFTWARE_ENDSTOP_Z
 #endif
 
+#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
+  //#define SOFT_ENDSTOPS_MENU_ITEM  // Enable/Disable software endstops from the LCD
+#endif
+
 /**
  * Filament Runout Sensors
  * Mechanical or opto endstops are used to check for the presence of filament.
diff --git a/Marlin/example_configurations/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h b/Marlin/example_configurations/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h
index 8dd11fbe0..a152698e7 100644
--- a/Marlin/example_configurations/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h	
+++ b/Marlin/example_configurations/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h	
@@ -862,6 +862,10 @@
   #define MAX_SOFTWARE_ENDSTOP_Z
 #endif
 
+#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
+  //#define SOFT_ENDSTOPS_MENU_ITEM  // Enable/Disable software endstops from the LCD
+#endif
+
 /**
  * Filament Runout Sensors
  * Mechanical or opto endstops are used to check for the presence of filament.
diff --git a/Marlin/example_configurations/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h b/Marlin/example_configurations/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h
index 00cc7a843..4a4e73df9 100644
--- a/Marlin/example_configurations/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h	
+++ b/Marlin/example_configurations/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h	
@@ -861,6 +861,10 @@
   #define MAX_SOFTWARE_ENDSTOP_Z
 #endif
 
+#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
+  //#define SOFT_ENDSTOPS_MENU_ITEM  // Enable/Disable software endstops from the LCD
+#endif
+
 /**
  * Filament Runout Sensors
  * Mechanical or opto endstops are used to check for the presence of filament.
diff --git a/Marlin/example_configurations/Infitary/i3-M508/Configuration.h b/Marlin/example_configurations/Infitary/i3-M508/Configuration.h
index eef6280d9..40231e943 100644
--- a/Marlin/example_configurations/Infitary/i3-M508/Configuration.h
+++ b/Marlin/example_configurations/Infitary/i3-M508/Configuration.h
@@ -850,6 +850,10 @@
   #define MAX_SOFTWARE_ENDSTOP_Z
 #endif
 
+#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
+  //#define SOFT_ENDSTOPS_MENU_ITEM  // Enable/Disable software endstops from the LCD
+#endif
+
 /**
  * Filament Runout Sensors
  * Mechanical or opto endstops are used to check for the presence of filament.
diff --git a/Marlin/example_configurations/JGAurora/A5/Configuration.h b/Marlin/example_configurations/JGAurora/A5/Configuration.h
index 2dbb0f48f..fb885e819 100644
--- a/Marlin/example_configurations/JGAurora/A5/Configuration.h
+++ b/Marlin/example_configurations/JGAurora/A5/Configuration.h
@@ -858,6 +858,10 @@
   #define MAX_SOFTWARE_ENDSTOP_Z
 #endif
 
+#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
+  //#define SOFT_ENDSTOPS_MENU_ITEM  // Enable/Disable software endstops from the LCD
+#endif
+
 /**
  * Filament Runout Sensors
  * Mechanical or opto endstops are used to check for the presence of filament.
diff --git a/Marlin/example_configurations/Malyan/M150/Configuration.h b/Marlin/example_configurations/Malyan/M150/Configuration.h
index a483363f6..aa4128ba7 100644
--- a/Marlin/example_configurations/Malyan/M150/Configuration.h
+++ b/Marlin/example_configurations/Malyan/M150/Configuration.h
@@ -870,6 +870,10 @@
   #define MAX_SOFTWARE_ENDSTOP_Z
 #endif
 
+#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
+  //#define SOFT_ENDSTOPS_MENU_ITEM  // Enable/Disable software endstops from the LCD
+#endif
+
 /**
  * Filament Runout Sensors
  * Mechanical or opto endstops are used to check for the presence of filament.
diff --git a/Marlin/example_configurations/Micromake/C1/basic/Configuration.h b/Marlin/example_configurations/Micromake/C1/basic/Configuration.h
index 60ec3b5db..ca4eac965 100644
--- a/Marlin/example_configurations/Micromake/C1/basic/Configuration.h
+++ b/Marlin/example_configurations/Micromake/C1/basic/Configuration.h
@@ -850,6 +850,10 @@
   #define MAX_SOFTWARE_ENDSTOP_Z
 #endif
 
+#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
+  //#define SOFT_ENDSTOPS_MENU_ITEM  // Enable/Disable software endstops from the LCD
+#endif
+
 /**
  * Filament Runout Sensors
  * Mechanical or opto endstops are used to check for the presence of filament.
diff --git a/Marlin/example_configurations/Micromake/C1/enhanced/Configuration.h b/Marlin/example_configurations/Micromake/C1/enhanced/Configuration.h
index 2ad958dcc..9936de383 100644
--- a/Marlin/example_configurations/Micromake/C1/enhanced/Configuration.h
+++ b/Marlin/example_configurations/Micromake/C1/enhanced/Configuration.h
@@ -850,6 +850,10 @@
   #define MAX_SOFTWARE_ENDSTOP_Z
 #endif
 
+#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
+  //#define SOFT_ENDSTOPS_MENU_ITEM  // Enable/Disable software endstops from the LCD
+#endif
+
 /**
  * Filament Runout Sensors
  * Mechanical or opto endstops are used to check for the presence of filament.
diff --git a/Marlin/example_configurations/RepRapPro/Huxley/Configuration.h b/Marlin/example_configurations/RepRapPro/Huxley/Configuration.h
index b3c43a2a2..3bc855a2f 100644
--- a/Marlin/example_configurations/RepRapPro/Huxley/Configuration.h
+++ b/Marlin/example_configurations/RepRapPro/Huxley/Configuration.h
@@ -895,6 +895,10 @@ Black rubber belt(MXL), 18 - tooth aluminium pulley : 87.489 step per mm (Huxley
   #define MAX_SOFTWARE_ENDSTOP_Z
 #endif
 
+#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
+  //#define SOFT_ENDSTOPS_MENU_ITEM  // Enable/Disable software endstops from the LCD
+#endif
+
 /**
  * Filament Runout Sensors
  * Mechanical or opto endstops are used to check for the presence of filament.
diff --git a/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h b/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h
index 5aef42a5b..63df2f1d0 100644
--- a/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h
+++ b/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h
@@ -846,6 +846,10 @@
   #define MAX_SOFTWARE_ENDSTOP_Z
 #endif
 
+#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
+  //#define SOFT_ENDSTOPS_MENU_ITEM  // Enable/Disable software endstops from the LCD
+#endif
+
 /**
  * Filament Runout Sensors
  * Mechanical or opto endstops are used to check for the presence of filament.
diff --git a/Marlin/example_configurations/RigidBot/Configuration.h b/Marlin/example_configurations/RigidBot/Configuration.h
index 1f670ffff..7130eb5d4 100644
--- a/Marlin/example_configurations/RigidBot/Configuration.h
+++ b/Marlin/example_configurations/RigidBot/Configuration.h
@@ -844,6 +844,10 @@
   #define MAX_SOFTWARE_ENDSTOP_Z
 #endif
 
+#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
+  //#define SOFT_ENDSTOPS_MENU_ITEM  // Enable/Disable software endstops from the LCD
+#endif
+
 /**
  * Filament Runout Sensors
  * Mechanical or opto endstops are used to check for the presence of filament.
diff --git a/Marlin/example_configurations/SCARA/Configuration.h b/Marlin/example_configurations/SCARA/Configuration.h
index b532c60a2..761d26a84 100644
--- a/Marlin/example_configurations/SCARA/Configuration.h
+++ b/Marlin/example_configurations/SCARA/Configuration.h
@@ -858,6 +858,10 @@
   #define MAX_SOFTWARE_ENDSTOP_Z
 #endif
 
+#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
+  //#define SOFT_ENDSTOPS_MENU_ITEM  // Enable/Disable software endstops from the LCD
+#endif
+
 /**
  * Filament Runout Sensors
  * Mechanical or opto endstops are used to check for the presence of filament.
diff --git a/Marlin/example_configurations/Sanguinololu/Configuration.h b/Marlin/example_configurations/Sanguinololu/Configuration.h
index cc209465d..da469aa21 100644
--- a/Marlin/example_configurations/Sanguinololu/Configuration.h
+++ b/Marlin/example_configurations/Sanguinololu/Configuration.h
@@ -877,6 +877,10 @@
   #define MAX_SOFTWARE_ENDSTOP_Z
 #endif
 
+#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
+  //#define SOFT_ENDSTOPS_MENU_ITEM  // Enable/Disable software endstops from the LCD
+#endif
+
 /**
  * Filament Runout Sensors
  * Mechanical or opto endstops are used to check for the presence of filament.
diff --git a/Marlin/example_configurations/TinyBoy2/Configuration.h b/Marlin/example_configurations/TinyBoy2/Configuration.h
index 45a9c69ef..7308bf56c 100644
--- a/Marlin/example_configurations/TinyBoy2/Configuration.h
+++ b/Marlin/example_configurations/TinyBoy2/Configuration.h
@@ -902,6 +902,10 @@
   #define MAX_SOFTWARE_ENDSTOP_Z
 #endif
 
+#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
+  //#define SOFT_ENDSTOPS_MENU_ITEM  // Enable/Disable software endstops from the LCD
+#endif
+
 /**
  * Filament Runout Sensors
  * Mechanical or opto endstops are used to check for the presence of filament.
diff --git a/Marlin/example_configurations/Tronxy/X1/Configuration.h b/Marlin/example_configurations/Tronxy/X1/Configuration.h
index 1540ea932..564b3ee03 100644
--- a/Marlin/example_configurations/Tronxy/X1/Configuration.h
+++ b/Marlin/example_configurations/Tronxy/X1/Configuration.h
@@ -846,6 +846,10 @@
   #define MAX_SOFTWARE_ENDSTOP_Z
 #endif
 
+#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
+  //#define SOFT_ENDSTOPS_MENU_ITEM  // Enable/Disable software endstops from the LCD
+#endif
+
 /**
  * Filament Runout Sensors
  * Mechanical or opto endstops are used to check for the presence of filament.
diff --git a/Marlin/example_configurations/Tronxy/X5S/Configuration.h b/Marlin/example_configurations/Tronxy/X5S/Configuration.h
index f43f4fb1a..bc35bf72c 100644
--- a/Marlin/example_configurations/Tronxy/X5S/Configuration.h
+++ b/Marlin/example_configurations/Tronxy/X5S/Configuration.h
@@ -846,6 +846,10 @@
   #define MAX_SOFTWARE_ENDSTOP_Z
 #endif
 
+#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
+  //#define SOFT_ENDSTOPS_MENU_ITEM  // Enable/Disable software endstops from the LCD
+#endif
+
 /**
  * Filament Runout Sensors
  * Mechanical or opto endstops are used to check for the presence of filament.
diff --git a/Marlin/example_configurations/Tronxy/XY100/Configuration.h b/Marlin/example_configurations/Tronxy/XY100/Configuration.h
index 6f8c1a05a..7f5ca67dd 100644
--- a/Marlin/example_configurations/Tronxy/XY100/Configuration.h
+++ b/Marlin/example_configurations/Tronxy/XY100/Configuration.h
@@ -857,6 +857,10 @@
   #define MAX_SOFTWARE_ENDSTOP_Z
 #endif
 
+#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
+  //#define SOFT_ENDSTOPS_MENU_ITEM  // Enable/Disable software endstops from the LCD
+#endif
+
 /**
  * Filament Runout Sensors
  * Mechanical or opto endstops are used to check for the presence of filament.
diff --git a/Marlin/example_configurations/Velleman/K8200/Configuration.h b/Marlin/example_configurations/Velleman/K8200/Configuration.h
index 64af06ce1..046e8425d 100644
--- a/Marlin/example_configurations/Velleman/K8200/Configuration.h
+++ b/Marlin/example_configurations/Velleman/K8200/Configuration.h
@@ -876,6 +876,10 @@
   #define MAX_SOFTWARE_ENDSTOP_Z
 #endif
 
+#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
+  //#define SOFT_ENDSTOPS_MENU_ITEM  // Enable/Disable software endstops from the LCD
+#endif
+
 /**
  * Filament Runout Sensors
  * Mechanical or opto endstops are used to check for the presence of filament.
diff --git a/Marlin/example_configurations/Velleman/K8400/Configuration.h b/Marlin/example_configurations/Velleman/K8400/Configuration.h
index 18e5c9cbb..edcdc544c 100644
--- a/Marlin/example_configurations/Velleman/K8400/Configuration.h
+++ b/Marlin/example_configurations/Velleman/K8400/Configuration.h
@@ -846,6 +846,10 @@
   #define MAX_SOFTWARE_ENDSTOP_Z
 #endif
 
+#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
+  //#define SOFT_ENDSTOPS_MENU_ITEM  // Enable/Disable software endstops from the LCD
+#endif
+
 /**
  * Filament Runout Sensors
  * Mechanical or opto endstops are used to check for the presence of filament.
diff --git a/Marlin/example_configurations/Velleman/K8400/Dual-head/Configuration.h b/Marlin/example_configurations/Velleman/K8400/Dual-head/Configuration.h
index 7ce0e737b..1bc383ae1 100644
--- a/Marlin/example_configurations/Velleman/K8400/Dual-head/Configuration.h
+++ b/Marlin/example_configurations/Velleman/K8400/Dual-head/Configuration.h
@@ -846,6 +846,10 @@
   #define MAX_SOFTWARE_ENDSTOP_Z
 #endif
 
+#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
+  //#define SOFT_ENDSTOPS_MENU_ITEM  // Enable/Disable software endstops from the LCD
+#endif
+
 /**
  * Filament Runout Sensors
  * Mechanical or opto endstops are used to check for the presence of filament.
diff --git a/Marlin/example_configurations/Wanhao/Duplicator 6/Configuration.h b/Marlin/example_configurations/Wanhao/Duplicator 6/Configuration.h
index 71a8fe9b9..d806f2369 100644
--- a/Marlin/example_configurations/Wanhao/Duplicator 6/Configuration.h	
+++ b/Marlin/example_configurations/Wanhao/Duplicator 6/Configuration.h	
@@ -856,6 +856,10 @@
   #define MAX_SOFTWARE_ENDSTOP_Z
 #endif
 
+#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
+  //#define SOFT_ENDSTOPS_MENU_ITEM  // Enable/Disable software endstops from the LCD
+#endif
+
 /**
  * Filament Runout Sensors
  * Mechanical or opto endstops are used to check for the presence of filament.
diff --git a/Marlin/example_configurations/adafruit/ST7565/Configuration.h b/Marlin/example_configurations/adafruit/ST7565/Configuration.h
index 2afc20ec4..2e3463e30 100644
--- a/Marlin/example_configurations/adafruit/ST7565/Configuration.h
+++ b/Marlin/example_configurations/adafruit/ST7565/Configuration.h
@@ -846,6 +846,10 @@
   #define MAX_SOFTWARE_ENDSTOP_Z
 #endif
 
+#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
+  //#define SOFT_ENDSTOPS_MENU_ITEM  // Enable/Disable software endstops from the LCD
+#endif
+
 /**
  * Filament Runout Sensors
  * Mechanical or opto endstops are used to check for the presence of filament.
diff --git a/Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration.h b/Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration.h
index 5e7428fe6..f21d6c4d4 100644
--- a/Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration.h
+++ b/Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration.h
@@ -978,6 +978,10 @@
   #define MAX_SOFTWARE_ENDSTOP_Z
 #endif
 
+#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
+  //#define SOFT_ENDSTOPS_MENU_ITEM  // Enable/Disable software endstops from the LCD
+#endif
+
 /**
  * Filament Runout Sensors
  * Mechanical or opto endstops are used to check for the presence of filament.
diff --git a/Marlin/example_configurations/delta/FLSUN/kossel/Configuration.h b/Marlin/example_configurations/delta/FLSUN/kossel/Configuration.h
index 094a65feb..3af9d8501 100644
--- a/Marlin/example_configurations/delta/FLSUN/kossel/Configuration.h
+++ b/Marlin/example_configurations/delta/FLSUN/kossel/Configuration.h
@@ -978,6 +978,10 @@
   #define MAX_SOFTWARE_ENDSTOP_Z
 #endif
 
+#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
+  //#define SOFT_ENDSTOPS_MENU_ITEM  // Enable/Disable software endstops from the LCD
+#endif
+
 /**
  * Filament Runout Sensors
  * Mechanical or opto endstops are used to check for the presence of filament.
diff --git a/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration.h b/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration.h
index 05c996baf..e72042739 100644
--- a/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration.h
+++ b/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration.h
@@ -978,6 +978,10 @@
   #define MAX_SOFTWARE_ENDSTOP_Z
 #endif
 
+#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
+  //#define SOFT_ENDSTOPS_MENU_ITEM  // Enable/Disable software endstops from the LCD
+#endif
+
 /**
  * Filament Runout Sensors
  * Mechanical or opto endstops are used to check for the presence of filament.
diff --git a/Marlin/example_configurations/delta/Hatchbox_Alpha/Configuration.h b/Marlin/example_configurations/delta/Hatchbox_Alpha/Configuration.h
index 561547fca..2f3d75748 100644
--- a/Marlin/example_configurations/delta/Hatchbox_Alpha/Configuration.h
+++ b/Marlin/example_configurations/delta/Hatchbox_Alpha/Configuration.h
@@ -980,6 +980,10 @@
   #define MAX_SOFTWARE_ENDSTOP_Z
 #endif
 
+#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
+  //#define SOFT_ENDSTOPS_MENU_ITEM  // Enable/Disable software endstops from the LCD
+#endif
+
 /**
  * Filament Runout Sensors
  * Mechanical or opto endstops are used to check for the presence of filament.
diff --git a/Marlin/example_configurations/delta/generic/Configuration.h b/Marlin/example_configurations/delta/generic/Configuration.h
index ed03c4d87..69f2284f7 100644
--- a/Marlin/example_configurations/delta/generic/Configuration.h
+++ b/Marlin/example_configurations/delta/generic/Configuration.h
@@ -965,6 +965,10 @@
   #define MAX_SOFTWARE_ENDSTOP_Z
 #endif
 
+#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
+  //#define SOFT_ENDSTOPS_MENU_ITEM  // Enable/Disable software endstops from the LCD
+#endif
+
 /**
  * Filament Runout Sensors
  * Mechanical or opto endstops are used to check for the presence of filament.
diff --git a/Marlin/example_configurations/delta/kossel_mini/Configuration.h b/Marlin/example_configurations/delta/kossel_mini/Configuration.h
index d46cae1fd..fae532d30 100644
--- a/Marlin/example_configurations/delta/kossel_mini/Configuration.h
+++ b/Marlin/example_configurations/delta/kossel_mini/Configuration.h
@@ -968,6 +968,10 @@
   #define MAX_SOFTWARE_ENDSTOP_Z
 #endif
 
+#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
+  //#define SOFT_ENDSTOPS_MENU_ITEM  // Enable/Disable software endstops from the LCD
+#endif
+
 /**
  * Filament Runout Sensors
  * Mechanical or opto endstops are used to check for the presence of filament.
diff --git a/Marlin/example_configurations/delta/kossel_pro/Configuration.h b/Marlin/example_configurations/delta/kossel_pro/Configuration.h
index 6c99848b1..a8172a4d7 100644
--- a/Marlin/example_configurations/delta/kossel_pro/Configuration.h
+++ b/Marlin/example_configurations/delta/kossel_pro/Configuration.h
@@ -959,6 +959,10 @@
   #define MAX_SOFTWARE_ENDSTOP_Z
 #endif
 
+#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
+  //#define SOFT_ENDSTOPS_MENU_ITEM  // Enable/Disable software endstops from the LCD
+#endif
+
 /**
  * Filament Runout Sensors
  * Mechanical or opto endstops are used to check for the presence of filament.
diff --git a/Marlin/example_configurations/delta/kossel_xl/Configuration.h b/Marlin/example_configurations/delta/kossel_xl/Configuration.h
index 66518cbe0..8a96e78d8 100644
--- a/Marlin/example_configurations/delta/kossel_xl/Configuration.h
+++ b/Marlin/example_configurations/delta/kossel_xl/Configuration.h
@@ -968,6 +968,10 @@
   #define MAX_SOFTWARE_ENDSTOP_Z
 #endif
 
+#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
+  //#define SOFT_ENDSTOPS_MENU_ITEM  // Enable/Disable software endstops from the LCD
+#endif
+
 /**
  * Filament Runout Sensors
  * Mechanical or opto endstops are used to check for the presence of filament.
diff --git a/Marlin/example_configurations/gCreate/gMax1.5+/Configuration.h b/Marlin/example_configurations/gCreate/gMax1.5+/Configuration.h
index 2064d5562..1459d4662 100644
--- a/Marlin/example_configurations/gCreate/gMax1.5+/Configuration.h
+++ b/Marlin/example_configurations/gCreate/gMax1.5+/Configuration.h
@@ -860,6 +860,10 @@
   #define MAX_SOFTWARE_ENDSTOP_Z
 #endif
 
+#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
+  //#define SOFT_ENDSTOPS_MENU_ITEM  // Enable/Disable software endstops from the LCD
+#endif
+
 /**
  * Filament Runout Sensors
  * Mechanical or opto endstops are used to check for the presence of filament.
diff --git a/Marlin/example_configurations/makibox/Configuration.h b/Marlin/example_configurations/makibox/Configuration.h
index e8c25f997..e08650ce6 100644
--- a/Marlin/example_configurations/makibox/Configuration.h
+++ b/Marlin/example_configurations/makibox/Configuration.h
@@ -849,6 +849,10 @@
   #define MAX_SOFTWARE_ENDSTOP_Z
 #endif
 
+#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
+  //#define SOFT_ENDSTOPS_MENU_ITEM  // Enable/Disable software endstops from the LCD
+#endif
+
 /**
  * Filament Runout Sensors
  * Mechanical or opto endstops are used to check for the presence of filament.
diff --git a/Marlin/example_configurations/tvrrug/Round2/Configuration.h b/Marlin/example_configurations/tvrrug/Round2/Configuration.h
index 02a37e8da..4b8fdad26 100644
--- a/Marlin/example_configurations/tvrrug/Round2/Configuration.h
+++ b/Marlin/example_configurations/tvrrug/Round2/Configuration.h
@@ -841,6 +841,10 @@
   #define MAX_SOFTWARE_ENDSTOP_Z
 #endif
 
+#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
+  //#define SOFT_ENDSTOPS_MENU_ITEM  // Enable/Disable software endstops from the LCD
+#endif
+
 /**
  * Filament Runout Sensors
  * Mechanical or opto endstops are used to check for the presence of filament.
diff --git a/Marlin/example_configurations/wt150/Configuration.h b/Marlin/example_configurations/wt150/Configuration.h
index 73af0acdc..45591dd8e 100644
--- a/Marlin/example_configurations/wt150/Configuration.h
+++ b/Marlin/example_configurations/wt150/Configuration.h
@@ -851,6 +851,10 @@
   #define MAX_SOFTWARE_ENDSTOP_Z
 #endif
 
+#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
+  //#define SOFT_ENDSTOPS_MENU_ITEM  // Enable/Disable software endstops from the LCD
+#endif
+
 /**
  * Filament Runout Sensors
  * Mechanical or opto endstops are used to check for the presence of filament.
diff --git a/Marlin/language_en.h b/Marlin/language_en.h
index 9b10c4edf..cc47320b2 100644
--- a/Marlin/language_en.h
+++ b/Marlin/language_en.h
@@ -55,6 +55,9 @@
 #ifndef MSG_LCD_ENDSTOPS
   #define MSG_LCD_ENDSTOPS                    _UxGT("Endstops") // Max length 8 characters
 #endif
+#ifndef MSG_LCD_SOFT_ENDSTOPS
+  #define MSG_LCD_SOFT_ENDSTOPS               _UxGT("Soft Endstops")
+#endif
 #ifndef MSG_MAIN
   #define MSG_MAIN                            _UxGT("Main")
 #endif
diff --git a/Marlin/ultralcd.cpp b/Marlin/ultralcd.cpp
index 4dd962c33..743ace30c 100644
--- a/Marlin/ultralcd.cpp
+++ b/Marlin/ultralcd.cpp
@@ -3109,6 +3109,10 @@ void kill_screen(const char* lcd_msg) {
     START_MENU();
     MENU_BACK(MSG_PREPARE);
 
+    #if HAS_SOFTWARE_ENDSTOPS && ENABLED(SOFT_ENDSTOPS_MENU_ITEM)
+      MENU_ITEM_EDIT(bool, MSG_LCD_SOFT_ENDSTOPS, &soft_endstops_enabled);
+    #endif
+
     if (_MOVE_XYZ_ALLOWED) {
       if (_MOVE_XY_ALLOWED) {
         MENU_ITEM(submenu, MSG_MOVE_X, lcd_move_get_x_amount);